Likewise, people ask, how long is Maytronics warranty?
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.
Also to know is, how do you test a Maytronics power supply?
Testing the power supply
- Connect the tester to the power supply.
- Switch the power supply on.
- If the tester light is on, proceed to test the cable.
- If the tester light is off, check the power socket and AC cable. If they are working, then replace the power supply and proceed to test the cable.
Can I leave my Dolphin pool cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
How long do Dolphin pool cleaners last?
Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for.
How do I test my pool cleaner power supply?
How do I turn on my Maytronics power supply?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
How do I fix my dolphin pool cleaner?
How long is a dolphin Pool Cleaner cycle?
Each cleaning cycle is 2 hours. If it doesn’t finish cleaning in one cycle, you’ll have to manually restart it. All of that is done with a few buttons on the power supply. Like other cleaning robots with smart navigation, it will take a few cycles for it to map out the most efficient path for your pool.
How often should I run my Dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Can Dolphin power supply get wet?
The power supply is water resistant but not waterproof. Please cover the power supply if inclement weather approaches. Do not leave the power supply in standing water as this will damage the internal components. Do not allow the power supply to be submerged in the pool.
How do you take apart a dolphin pool cleaner?
How do I get the dolphin pool cleaner out of my pool?
The easiest and most fun way to get the robot out of the water:
- Log into the MyDolphin™ Plus app and click “Pick-up mode”.
- The robot will reach the wall closest to it, and will rise, and will wait for 3 minutes above the water surface.
- Grab the robot by the handle and pull it out the water.
How do you troubleshoot a Maytronics Dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Why won’t my Dolphin pool cleaner climb walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
How do I reset my Dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
How do you replace climbing rings on a dolphin pool cleaner?
How do I troubleshoot Maytronics dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.