Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Also question is, why is my robotic pool cleaner not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
In respect to this, how do I know when my dolphin pool cleaner is finished?
SHUT DOWN – After about 3 hours of operation, the Cleaner will shut down automatically as indicated by the 4 LEDs turning off. The Cleaner can remain in the pool until you are ready to pull it out. Many people run the cleaner at night and take it out in the morning.
Can Maytronics power supply get wet?
The power supply is water resistant but not waterproof. Please cover the power supply if inclement weather approaches. Do not leave the power supply in standing water as this will damage the internal components.
Where is the impeller on my dolphin pool cleaner?
How do I use Dolphin cleaner?
Just drop it in your pool, turn it on and leave it for about 5 hours. It computes a path to maximize cleaning and even climbs the walls to scrub and vacuum the entire pool floor, walls and waterline.
How do you replace climbing rings on a dolphin pool cleaner?
Why is the pool cleaner not working?
Most likely, the key reason is a congested pool filter or skimmer basket, or a clog at the mouth of your pool cleaner. If you own a particularly powerful pool pump or your water-flow is really strong, your cleaner will probably move faster than normal.
Why does my dolphin pool cleaner do wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
How do I setup my dolphin pool cleaner?
Adjusting the handle angle
- Lay the handle down at an angle of 180º to the ground.
- Push the base of the arm into the body of the robot pool cleaner and slide it towards the rear of the robot pool cleaner until it clicks into the required position.
How long is Maytronics warranty?
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.
How do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
How do I increase the suction on my pool vacuum?
Why is there no suction in my pool skimmer?
Can you leave the Dolphin cleaner in the pool overnight?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
Why won’t my dolphin pool cleaner climb walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Why is my dolphin pool cleaner not climbing walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Why is there no suction in my pool vacuum?
How do you test a Maytronics power supply?
Testing the power supply
- Connect the tester to the power supply.
- Switch the power supply on.
- If the tester light is on, proceed to test the cable.
- If the tester light is off, check the power socket and AC cable. If they are working, then replace the power supply and proceed to test the cable.
How do you service Dolphin pool cleaner?
How do I turn on my Maytronics pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
Why is my pool vacuum not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
Can you leave the Dolphin cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
Why my pool vacuum has no suction?
Why is my automatic pool vacuum not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
How do I reset my Dolphin pool cleaner?
Turn the power supply OFF. Wait 30 seconds, then turn it back on. Pool Cleaner does not move / Red light on the power supply.
How do I get my pool vacuum to work?
Why is my dolphin pool cleaner not moving?
If you can identify an obstruction you can remove the object and then run your Dolphin again. If the Dolphin starts and continues to operate as per normal the the obstruction was the cause of the robotic pool cleaner not moving.
How do you test a dolphin power supply?
How long does a Dolphin pool vacuum last?
Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for. If you keep your robotic pool cleaner in good condition, there is no reason it shouldn’t last much longer.
Why can’t you use an extension cord with a dolphin pool cleaner?
Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant.
How long is a cycle for a Maytronics dolphin?
Product Specifications
| S 300 | |
| Ideal pool length | Up to 12 m |
| Cleaning coverage | Floor, Walls & Waterline |
| Brushing | Brush + Active Scrubber |
| Cleaning cycle time | 1 or 2 hours |
Can I leave my dolphin pool cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
How often should I run my dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Why is my pool cleaner not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
What is the lifespan of a robotic pool cleaner?
How do I reset my Dolphin?
Press and hold “Blue” and “Call” buttons to cold boot the Dolphin. Upon cold boot, when the display returns, type: 1277. A little menu will appear showing the reset options.
Can I run my pool robot in the rain?
The power supply for most robot pool cleaners is water-resistant, but that’s not enough to protect itif the rain is bucketing down outside. Leaving the power supply in standing water could damage it. It’s best to store the machine and its power supply in a covered location when not in use.
How do you use the Maytronics dolphin?
How long should I run my pool robot?
Automatic Vacuum
You should allow the vacuum to run until it has cleaned the entire pool, including the bottom and the sides. This averages between two and six hours. The better your pool has been maintained — for example, if you vacuum every week — the less time it takes.
How long do Dolphin pool cleaners last?
Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for.
Why is my pool robot not working?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
How long does dolphin pool cleaner run?
It’s packed with smart tech features and can clean an in-ground pool up to 50 feet within 3 hours. While you’ll get what you pay for with most appliances, with the Dolphin Premier, it doesn’t come with any extra accessories. For the premium price, that’s disappointing. But it might be worth it in the long run.
Why does my dolphin pool cleaner keep doing wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
Why does pool cleaner get stuck?
How do I reset my Honeywell 7800?
How often should you use Dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Why does my pool cleaner stopped working?
Most likely, the key reason is a congested pool filter or skimmer basket, or a clog at the mouth of your pool cleaner. If you own a particularly powerful pool pump or your water-flow is really strong, your cleaner will probably move faster than normal.
How long is a Dolphin vacuum cycle?
Each cleaning cycle is 2 hours. If it doesn’t finish cleaning in one cycle, you’ll have to manually restart it.
How do you change clean mode on Dolphin?
Setting the Automatic Mode
- press the Manual/Automatic Selection button ONCE only.
- The Digital screen will light up and the two (regular/fast) icons will show up.
- To choose regular or fast cleaning cycle use the right or left arrows.
- When you reach the required function press the Set/OK button.
Can I leave dolphin in pool?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
How long do pool robots last?
Are pool vacuums worth it?
Bottom Line: Yes! Robotic pool cleaners are 100% worth the investment. It’ll be the best money you ever spent on your swimming pool. Any automatic swimming pool cleaner should be able to clean your pool within about three hours, depending on your pool’s size.