How To Operate a Maytronics Dolphin Nautilus Robotic Cleaner
- STRAIGHTEN POWER CORD – The blue Power Cord is stored coiled. …
- CONNECT TO POWER SUPPLY – Connect the power cord to the power supply by removing the cap and then pushing and twisting the cord plug onto the power supply receptacle.
Likewise, how do I use Dolphin s200?
Moreover, how does Maytronics dolphin work?
Dolphin is a robotic cleaner that circulates your pool, picking up debris and scrubbing away dirt and algae from the floor, walls, and waterline. Its smart technology maps out the most efficient cleaning route, navigates using PowerStream mobility, and can sense obstacles as it works.
How long is a Dolphin Pool Cleaner cycle?
Each cleaning cycle is 2 hours. If it doesn’t finish cleaning in one cycle, you’ll have to manually restart it. All of that is done with a few buttons on the power supply. Like other cleaning robots with smart navigation, it will take a few cycles for it to map out the most efficient path for your pool.
How do you use Maytronics pool cleaner?
The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly sitting on the floor of the pool. Turn it ON and let it get the job done. Unwind the floating cable and stretch it out completely so that it has no kinks.
How do you use the Maytronics pool vacuum?
How do I turn on Dolphin pool cleaner?
How do I empty my dolphin Pool Cleaner?
How long should pool sweep run daily?
You should allow the vacuum to run until it has cleaned the entire pool, including the bottom and the sides. This averages between two and six hours. The better your pool has been maintained — for example, if you vacuum every week — the less time it takes.
Can you leave Dolphin robot in pool?
The power supply for most robot pool cleaners is water-resistant, but that’s not enough to protect itif the rain is bucketing down outside. Leaving the power supply in standing water could damage it. It’s best to store the machine and its power supply in a covered location when not in use.
Why does my Dolphin Pool Cleaner do wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
How does Dolphin vacuum work?
All you need to do is to place the Dolphin in your pool and turn it on. The computer in the cleaner learns the dimensions of your pool and then programs itself to efficiently vacuum every inch of the pool. The debris and any dirt are brushed into a self contained vacuum bag.
How long should I run my pool cleaner?
The rule of thumb for pool maintenance is to run your pump for eight hours per day.
Can you leave a Dolphin pool cleaner in the pool?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
Can I leave my dolphin pool cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
Why can’t you use an extension cord with a Dolphin Pool Cleaner?
Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant.
How do you start a Maytronics dolphin?
Can I use an extension cord with my Dolphin pool cleaner?
Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
How does dolphin robot work?
Dolphin is a robotic cleaner that circulates your pool, picking up debris and scrubbing away dirt and algae from the floor, walls, and waterline. Its smart technology maps out the most efficient cleaning route, navigates using PowerStream mobility, and can sense obstacles as it works.
How often should you use Dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
Can you leave pool vacuum in pool overnight?
Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
How often should you run Dolphin?
If you have a lot of swimming in your pool, you can use the robotic pool cleaner every other day or once a day. If you don’t swim a lot, you should only run the pool once every two weeks.
How do you get the dolphin robot out of the pool?
The easiest and most fun way to get the robot out of the water:
- Log into the MyDolphin™ Plus app and click “Pick-up mode”.
- The robot will reach the wall closest to it, and will rise, and will wait for 3 minutes above the water surface.
- Grab the robot by the handle and pull it out the water.
How do I setup my dolphin pool cleaner?
Adjusting the handle angle
- Lay the handle down at an angle of 180º to the ground.
- Push the base of the arm into the body of the robot pool cleaner and slide it towards the rear of the robot pool cleaner until it clicks into the required position.
How do you put Dolphin in pool?
How do I clean my Maytronics dolphin?
Can you swim with a vacuum in the pool?
Increases Wear and Tear. You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work.
How do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
Can you leave the Dolphin cleaner in the pool?
Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.