Using the remote control
- Press the On/Off button once. The remote control will start in manual direction control mode.
- Use the direction control arrows (see right) to control the movement of the robot around the pool.
- To exit the manual direction control mode, press the Manual/Automatic select button once only.
Then, why is my pool cleaner not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Beside above, how do I clean my Maytronics dolphin?
How do I turn on my Maytronics pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
How do I pair my dolphin Bluetooth?
In the Dolphin: go to ‘Start’ > ‘Settings’ > ‘Connections’ > ‘Dolphin Wireless Manager’ > ‘Bluetooth’ (to enable the Bluetooth radio). Close the Dolphin Wireless Manager. On the Dolphin, tap on “Back”, Tap on the ‘Bluetooth’ icon.
Is the dolphin DB2 Bluetooth?
The Dolphin DB2 is not a Bluetooth or smartphone application compatible model.
Why won’t my dolphin pool cleaner climb walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Can I leave my dolphin pool cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
Why is my dolphin pool cleaner not moving?
The first step is to check that the filter basket or filter bag is clean and not full causing lack of water flow. If the filters or bag is overly full this can compromise the robotic pool cleaner’s ability to efficiently navigate around the swimming pool.
How do I turn on dolphin pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
Is Maytronics a dolphin?
Maytronics, a kibbutz company, has seen its share triple in three years as it uses technology to keep ahead of rivals. It’s called the Dolphin, but it looks more like a turtle and operates like a snail.
Does Dolphin premier have WIFI?
Plus, the Dolphin Premium is ultra-compact, measuring just 16.5″ long, 17″ tall and 13″ in height. With industry-first Wifi and Bluetooth technology built-in, and the user-friendly Dolphin Control app on your smartphone, you can remotely control and maneuver your Dolphin Premium cleaner.
How do I adjust my dolphin pool cleaner?
To adjust the handle angle:
- Lay the handle down at an angle of 180º to the ground.
- Push the base of the arm into the body of the robot pool cleaner and slide it towards the rear of the robot pool cleaner until it clicks into the required position.
How do I use Dolphin cleaner?
The Dolphin Advantage Robotic Pool Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 5 hours. It computes a path to maximize cleaning and even climbs the walls to scrub and vacuum the entire pool floor, walls and waterline.
How do I connect my dolphin pool cleaner to my phone?
Activate the Pool Cleaner Using your Mobile Smart Device
Sign up by creating an account or use your Gmail/Facebook accounts. Scan the QR code located on the side of the power supply. Alternatively, press “Search for your robot manually” to pair with your Pool Cleaner. The app will start pairing with your power supply.
Why is my automatic pool vacuum not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
How do I setup my dolphin pool cleaner?
Adjusting the handle angle
- Lay the handle down at an angle of 180º to the ground.
- Push the base of the arm into the body of the robot pool cleaner and slide it towards the rear of the robot pool cleaner until it clicks into the required position.
How do I clean my dolphin m400?
How long is a cycle for a Maytronics dolphin?
The maytronics website says the Nautilus Plus cycle time in 2.5 hours. The regular nautilus cycle time is 3 hrs.
How much is a Maytronics dolphin?
As with most robotic pool cleaners, the $1,499 Maytronics Dolphin S300i is rather pricey, but when you consider the hours spent scrubbing and vacuuming your pool over the course of the season, it’s money well spent.
Are dolphin pool cleaners Electric?
The Dolphin Nautilus (99996323) is a robotic pool vacuum that is capable of cleaning most inground pools. Like other robotic pool cleaning machines, all you need is an electric power source. No pumps needed. This model cleans the floor and walls of pools up to 50 feet across.
How do I know when my dolphin pool cleaner is finished?
SHUT DOWN – After about 3 hours of operation, the Cleaner will shut down automatically as indicated by the 4 LEDs turning off. The Cleaner can remain in the pool until you are ready to pull it out. Many people run the cleaner at night and take it out in the morning.
How often should you run Dolphin?
If you have a lot of swimming in your pool, you can use the robotic pool cleaner every other day or once a day. If you don’t swim a lot, you should only run the pool once every two weeks.
Can I leave my dolphin pool cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.