Just so, what does the winterize setting on my pool pump do?
After a backwash and rinse, place the valve to the “winterize” setting on the top mount valve. This will allow water to drain from the valve. Next, you’re going to have to completely drain all the water from the filter tank.
Also, how do I winterize my Hayward pool heater?
In this regard, how do I get water out of my pool pump for the winter?
How do you drain a Hayward pump?
Do I need to run my pool pump in the winter?
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
How do you winterize a Hayward pool filter?
How to winterize the Hayward sand filter
- Completely drain tank by unscrewing drain cap at base of filter tank. Leave cap off during winter.
- Depress Vari-Flo control valve handle and rotate so as to set pointer on valve top between any two positions. This will allow water to drain from the valve.
How do you winterize a Hayward sand filter and pump?
How do you winterize a Hayward heat pump?
Steps to winterize your Pool Heat Pump
- Turn off all electrical power to the heat pump.
- Turn off the circulation pump.
- Disconnect the water piping.
- Remove the drain plug and make sure condenser drains out.
- Flush the heat pump with water by hooking up a garden hose into the water inlet line.