Moreover, what size heat pump do I need for 12000 gallon pool?
50K BTU heat pumps are meant for small pools, or aboveground pools, under 12,000 gallons. It will work on larger pools, but heating will be slow and total temperature rise may not be what you desire.
Keeping this in consideration, what is a comfortable pool temperature?
Are pool heat pumps worth it?
Heat pump pool heaters cost more than gas pool heaters, but they typically have much lower annual operating costs because of their higher efficiencies. With proper maintenance, heat pump pool heaters typically last longer than gas pool heaters. Therefore, you’ll save more money in the long run.
What size heat pump do I need for my pool?
Heat Pump Sizing Chart – Inground Pools
| Pool Size (Feet) | Summer 4 BTU’s | Spring & Fall 5 BTU’s |
|---|---|---|
| Up To 15,000 Gallons 14′ x 28′ | 85,000 BTU | 85,000 BTU |
| Up To 20,000 Gallons 16′ x 32′ | 85,000 BTU | 110,000 BTU |
| Up To 25,000 Gallons 18′ x 36′ | 110,000 BTU | 125,000 BTU |
| Up To 30,000 Gallons 20′ x 40′ | 125,000 BTU | 150,000 BTU |
How long does it take to heat a pool with a Hayward heat pump?
Can a pool heat pump be too big?
A small pump on a large pool means it will be very slow to heat and might not even reach the desired temperature you’re aiming for. Generally speaking, you should oversize the heat pump as much as possible.
How many BTU’s do I need for a 15000 gallon pool?
For pools under 10,000 gallons, small gas heaters like the Hayward 100K$) BTU output are suitable. Pools up to 15,000 gallons should look at the Pentair 125K BTU or higher, and 20,000 gallon above ground pools should look at the Raypak 150K BTU.
What size pool heater do I need for 20000 gallons?
20,000 gallons x 8.3 lbs / gallon = 166,000 lbs of water that needs to be heated. Since it takes one Btu to heat one pound of water by a single degree, we now know that raising this entire 20,000-gallon pool by one degree will require 166,000 Btu of heat energy.
Should I oversize my pool heat pump?
A pool heater can be undersized: if it cannot replace the heat lost through evaporative cooling, the pool’s temperature will fall below the ideal. However, there is no such thing as oversizing a pool heater. The larger the heater’s output, the faster it heats the water in the pool, and it will not begin short-cycling.
Should I run my pool heat pump at night?
How many BTU heater do I need for my pool?
To maintain the temperature, you need about 10 BTUs per hour, per square foot of surface, per degree above the air temperature. That means keeping a pool with a surface area of 300 square feet at 80 F (27 C) degrees in 60 F (15 C) degree weather would require 60,000 BTU per hour.
Does a pool heat pump cool water?
Heat Pumps can help save you money!
This is a much more efficient way to heat your pool’s water. To cool your pool’s water, the process is reversed. In cooling mode, heat pumps pull heat out of the water and put it back in the air, when Mother Nature decides to turn up her thermostat.