One may also ask, how much does labor cost to replace a pool pump?
Do it yourself pool pump replacement involves the cost of the replacement pump, which may run from $150 to $800 or more depending on the type of pool pump and the size of the pool. When they hire a professional, the cost will include labor, which can additionally cost $80 to $200.
Consequently, what happens if your pool pump is too big?
Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.
Why does my pool filter get dirty so quickly?
If the pool is affected by algae, the pool filters can get clogged very quickly. Algae are tiny aquatic plants (or organisms) that grow in pools and in large groups. These plants can clog up the filter easily during pool water circulation.
How many HP does my pool pump need to be?
According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM). Since we always go for the higher GPM, we would select the 1 HP pump.
How long do you need to run a pool pump?
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.
How many GPH is a 3/4 HP pool pump?
Is it worth fixing a pool pump?
When determining the magic number of replacement parts cost versus the cost of the whole pump, we generally suggest 60-75% as the standard. If the cost to repair is within or over this range, it is smarter to replace the pump. This way you have a brand new pump and warranty covering any mishaps down the line.
Which Hayward pump do I have?
Luckily, most motor labels come with two searchable model numbers. Hayward labels (pictured) normally have a layout of the Motor Manufacturer model number listed at the upper left and Hayward’s proprietary motor model number normally listed at the bottom left.
What is the normal pressure of a Hayward pool pump?
If anything could be considered “normal”, it would be about 10 psi. Most filter systems are designed to operate in the 5-15 or 10-20 psi range. The way to find out your particular correct pool filter pressure is to clean or backwash the filter thoroughly and empty the pump and skimmer baskets.
How much does a Hayward pool pump cost?
Is a higher HP pool pump better?
A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.
Is it OK to run pool pump 24 hours a day?
A Rule of Thumb
Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
How often do you change salt water pool filters?
Most pool filter cartridges are suitable for around 2,000 hours, which is usually around one to two years.
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
Can I replace my 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
Does HP matter for pool pump?
Larger horsepower pumps “draw more amps” – and that’s what you really pay for on your electric bill, Amperes. If you can reduce the size of the horsepower on a replacement pump, you will definitely see savings. This can be accomplished by using a High Head pump, or a pump that produces more water volume.
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
Why is my Hayward pool pump so loud?
The most common reasons for a noisy pool pump include blocked lines, a blocked impeller, faulty bearings and seals or unsecure mountings. The problems cause noises including loud rattling, grinding, gurgling, whining, buzzing, high pitched noises and vibrations.
How do I know what size pump I need for my pool?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
How much does it cost to rebuild a pool pump motor?
A replacement motor is generally going to cost you in the neighborhood of $150 – $300 depending on the horsepower. Add another $15 – $30 for the absolutely necessary, non-negotiable new shaft seal.
Can my pool pump be too powerful?
The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.
How many gpm does a 2.5 HP pool pump?
Is Hayward a good pool brand?
Hayward may have a smaller footprint than Pentair in the marketing and advertising world, but they make great products. Their filters are user-friendly and reliable. They clean well and overall are very well designed.
What is the difference between Hayward w3sp2610x15 and SP2610X15?
What is the difference between sp2610x15 and w3sp2610x15? Answer: This is the same part. The “W3” that precedes the SP2610X15 in some products represents an online retailer part number.
How much does a new Hayward pool pump cost?
Is Hayward a good pool pump?
One of the most reliable pumps on the market, the Hayward Super Pump has made a name for itself because of its reliability. But there is much more to it. It is quiet and energy-efficient and the clear basket that requires no tools to remove making it easy to maintain.
How much does it cost to replace a pool pump and filter?
Pool Water Pump Installation Cost
| Pool Water Pump Costs | |
|---|---|
| National average cost | $1,000 |
| Average range | $700-$1,300 |
| Minimum cost | $400 |
| Maximum cost | $5,400 |
Can I replace a 3/4 HP pool pump with a 1 HP pool pump?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
What size pool pump do I need for a 15000 gallon pool?
10,000 – 15,000 gallon pools need a pool pump with flow rate between 20 and 35 GPM. Based on our flow rate per pump size(in hp) table above, a 1hp pool pump will generate this flow rate.
Can you reuse pool filters?
Pool filter sand should not be reused because the roughness of the particles that is used to catch unwanted bacteria, contaminates, and debris will be too worn down to be effective.
How much is a Hayward filter?
How often should you replace Hayward pool filters?
Is Pentair better than Hayward?
The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What is the flow rate of a 3/4 HP pool pump?
Doheny’s Above Ground Pool Pump,115 volt, ¾ hp – Max flow rate is 62 gallons per minute (gpm) and max feet of head is 30 feet.
What is better a cartridge or sand filter?
If you are looking for a highly efficient solution with the least amount of bacteria and debris left swimming around in your pool, the cartridge filter is your best solution. The cartridge filter can catch finer debris than a sand filter, being 10-20 microns versus 20-40 microns.
Which is better Pentair or Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What size pump do I need for a 30000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
What are the best hours to run your pool pump?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
How long do Hayward filters last?
With proper preventative maintenance, the non wear out parts of a filter should last between 5-10 years as well- these include the band clamps, the internal grids, and plumbing including valves. The wear out parts- O rings, gauges, air relief systems, and Cartridge filter elements all need to be checked annually.
What size pool pump do I need for a 30 000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How much HP pump do I need?
Horsepower theoretically required for pumping water equals the gallons per minute multiplied by the head in feet, and divided by 4.000 For power recommended, divide by 2000 instead of 4000.
What size pump do I need for my pool?
Sizing the Pump for Your Swimming Pool
- Circular Pools: Diameter (ft.) x Diameter (ft.) x Average Depth (ft.) x 5.9 = Total pool capacity in gallons.
- Oval Pools: Length (ft.) x Width (ft.) x Average Depth (ft.) x 6.7 = Total pool capacity in gallons.
- Rectangular Pools: Length (ft.) x Width (ft.) x Average Depth (ft.)
How often should I change pool filter sand?
On average, sand should be replaced every 3-5 years. This may be longer if the pool stays clear, or shorter, if the filter runs all the time. The jagged edges of the sand wear down and become smooth as the sand ages.
Can a pool pump be too powerful?
The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.
How many hours a day should you run your pool pump?
Do pool pumps lose power over time?
The pump is losing power.
Over time, older pumps can begin to deteriorate and lose power. In other cases, you might need to clean the filter or have it backwashed.
How do I know if my pool pump needs replacing?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
What size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day.
How do you know when a pool pump is going bad?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
Are variable speed pool pumps worth it?
A Worthwhile Investment. Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
What speed should a Hayward pool pump run?
Since a variable speed Hayward pool pump can operate at speeds as low as 600 RPM, it will also be much quieter than a single speed pump that runs at 3,450 RPM. Generally speaking, higher RPMs equals more noise and that is certainly not what anyone wants out of their pool pump.
What size filter do I need for a 10000 gallon pool?
Filter Size
A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.
What size pool pump do I need for a 30000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How do I know if my pool filter is bad?
There are ways to tell if the swimming pool filter is bad. If the water turns cloudy, then you know that your filter is not functioning properly. Leaking multi-port valves, broken or bad laterals, valve failure, tank failure, and pressure issues are some of the other indicators that the pool filter is bad.
How much is a pump for an inground pool?
The national average cost for installing a pool pump is between $700 and $1,300, with most people paying around $1,000 to install a variable speed pool pump in an in-ground pool. At the low end of the spectrum, however, you can opt for a single-speed or low-head pool pump for $400.
How long should a pool pump motor last?
How long does a pump motor last? Most pool pump motors last at least 6-8 years, often longer. But that’s if you’re referring to magnetic drive pool motors, which are used in newer variable speed pumps.
Is 1 HP pool pump enough?
Let’s start with an unpopular and incredible statement: A typical size residential pool can be circulated effectively with a 1 HP pump.
How do I clean the filter on my pool pump?
This is the quicker, easier, and less dangerous cleaning method.
- Backwash the filter for 3 to 5 minutes to remove debris.
- Turn the pump off.
- Open the air relief valve.
- Remove the drain plug, and let the water drain out of the filter tank.
- Remove the clamps (or other latching mechanisms) holding the filter together.
How much does it cost to replace a pool filter?
Can I replace my pool pump with a bigger one?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
Can I replace a 1.5 HP pool pump with a 2hp?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Which swimming pool pump is best?
- BEST OVERALL: Hayward W3SP2610X15 Super Pump Pool Pump.
- BEST BUDGET: Pool Pump by Blue Torrent, 1 HP Maxiforce In Ground.
- BEST SINGLE SPEED: Hayward W3SP2307X10 MaxFlo XL Pool Pump.
- BEST DUAL SPEED: XtremepowerUS 2HP In-Ground Pool Pump.
- BEST VARIABLE SPEED: Hayward W3SP2303VSP MaxFlo Variable-Speed Pool Pump.
Is it better to run pool pump at night?
It’s best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Can a pump be too big for a pool?
Sizing the Pump for Your Swimming Pool
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What causes a pool pump to burn out?
A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.
What size pool pump do I need for a 30 000-gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How long do Hayward pool filters last?
Typically, cartridge filters need to be replaced every 3 to 5 years. You can also tell your cartridge filter needs to be swapped out if you start having to clean it more often; that is, if the pressure gauge increases by 8 PSI much more often than every 6 months, you may need to replace it.
How long does a Hayward variable speed pump last?
Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.
How much is a new Hayward pool pump?
Where are Hayward pumps made?
Hayward Industries, Inc | Manufactured in North Carolina.
Should I run my pool pump on high or low speed?
No matter what size pump you are using, running it at lower speeds saves energy – and money. For example, you could run your variable or two speed pump twice as long as you normally would on its higher speeds and still save money.
How much do Hayward pool pumps cost?
How do I know what size pool pump I need?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
Should you run pool pump 24 hours day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
How much does it cost to replace pool pump and filter?
You could pay anywhere between $650 to $5,500 to replace a pool filter and pump, though most people won’t pay more than $3,500. Pool filters cost anywhere between $150 and $1,500 to replace.
Which is better Pentair vs Hayward?
The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
How long should you run your variable speed pool pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
What is the difference between 1 HP and 1.5 HP pool pump?
As I mentioned before, the 1.5 HP PowerFlo LX has only 1 GPM more flow rate than the 1 HP PowerFlo LX so very little difference between the two pumps. However, for an 18″ filter, you don’t want to exceed more than about 35 GPM.