How long do Pentair pool pumps last?

Simply so, what is the lifespan of a pool pump motor?

Similarly one may ask, what is the flow rate of a 3/4 HP pool pump?

According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM).

How long should a Pentair booster pump last?

153 Related Question Answers Found

How do you read pool pump labels?

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day.

How do you tell if a pool pump is burned out?

How do you unlock Pentair Intelliflo?

TO UNLOCK THE PUMP:

Press and hold the “1” and Quick Clean buttons for atleast 3 seconds. “Enter Loc Code” will scroll across the screen.

Do variable speed pumps last longer?

They are also much quieter, vibrate less, run cooler, last longer, are digitally controlled, and have advanced diagnostics. Basically, variable speed pumps are the Cadillac of pool pumps, and most studies show that they are 90% more efficient than standard one-speed pumps.

Who owns Pentair?

How do I reset my Pentair pump?

To reset the pump to the factory default settings:

1. Ensure that the pump is powered on and the green power LED is on.
2. Press the Stop button to stop the pump.
3. Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.

How do I know if my pool pump is 115 or 230?

The voltage reading should be within 10% of the voltage. For example, if the voltmeter reads between 207 and 253 volts, then you know you have a 230V motor.

Is a bigger pool pump better?

A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.

Are 2 speed pool pumps worth it?

At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.

Can I replace 1 HP pool pump with 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.

What does an impeller ring do?

Impeller wear rings are small plastic rings (10) that protect a misaligned impeller from rubbing, and must be installed before placing the Diffuser. TIP: Each horsepower motor is matched to a slightly different sized impeller, with a different part number.

How do I reset my Pentair pool timer?

How to Set the Date/Time on the Pentair Intelliflo

1. From the home screen, press the “Menu” button.
2. Use the Up or Down Arrows to cycle to “Settings”
3. Press “Select”
4. Cycle to “Date/Time”
5. Press Select.
6. You will see the factory default Date, press “Select” again to edit.

What happens if your pool pump is too small?

If your pool filter is too small for the pump, there will be additional strain on the pump motor as it tries to push water through and encounters resistance at the filter. This will eventually burn out the pump motor and your filtration will also be compromised.

What is the average lifespan of a pool pump?

How much does it cost to rebuild a pool pump motor?

If the pool pump is still under warranty, it’s a good idea to replace the whole pump. Merely replacing the motor is less costly than replacing the whole pool pump. A DIY motor replacement costs around $25 to $200, while hiring a professional can cost an additional $40 to $100.

Is there a reset button on a Pentair pool pump?

Is it OK to run pool pump 24 hours a day?

The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.

Where do O rings go pool pump?

The Pool Filter O-ring should be in a groove in the collar of the filter head. If it’s stretched like this one, it may fall out of the groove – a good indication that it’s time to be replaced. Roll the O-ring out of the groove and off the filter head collar.

Can a pump be too big for a pool?

Sizing the Pump for Your Swimming Pool

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

How long is the warranty on a pool pump?

WARRANTY CARD

PRODUCT/PRODUCT CATEGORY	LENGTH OF WARRANTY	REQUIRES PROFESSIONAL INSTALLATION
Single-Phase, TEFC Super Duty Pumps	2 Years	✓
SVRS Pumps	2 Years	✓
SuperFlo® VS, SuperFlo® VST and SuperMax® VS Variable Speed Pumps	2 Years	✓
IntelliFlo (#011018, #011028, #011059, #011060 and IntelliPro (#P6E6VS4H-209, #013028)	2 Years	✓

How many gallons per hour does a 2 HP pool pump?

The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.

How long does a Pentair variable speed pump last?

Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.

Can a pool pump motor be repaired?

Most of the new generation of pumps are already equipped with automatic controls and safety features. In fact, if you take enough time to learn the manual, you might find yourself able to repair some of the problems on your own. Of course, there are repairs and replacements are best left in the hands of professionals.

How do I reset Intelliflo pump?

Resetting the pump to factory defaults

1. Ensure that the pump is powered on and the green power LED is on.
2. Press the Stop button to stop the pump.
3. Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.

Can I put a variable speed motor on my pool pump?

Variable speed pump replacement motors can be installed on existing single-speed pumps. Upgrading to a variable speed motor is all that is necessary to convert pools into high-efficiency systems. Service technicians should select the variable speed motor that is appropriate for the size of pool, plumbing and pump.

Can I replace a 1.5 HP pool pump with a 1 hp?

Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.

Is it better to run a pool pump at night or day?

It’s best to run your pool pump during the day

Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!

Is Pentair better than Hayward?

The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

Are variable speed pool pumps worth the money?

A Worthwhile Investment

Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.

Is Pentair a good brand?

Pentair undisputedly makes the best Cartridge and Sand filters while their IntelliFlo pumps are just incredible manufacturing marvels. I made this conclusion based purely on the quality of their fiberglass filter tanks. They are extremely reliable and so are its internal parts such as cartridges and filter elements.

What size pump do I need for a 24 above ground pool?

For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.

Should your pool pump run all the time?

Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.

What is the lifespan of a swimming pool pump?

Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.

How do you know if your pool pump motor is bad?

Your pump could be leaking water, or the bearings might need to be replaced instead of the entire motor. Screeching is also a sign that your motor bearings need to be replaced. These loud, often painful sounds could also be a sign of rust or oxidation, making it more difficult for the bearings to do their job.

Are variable speed pumps worth it?

A Worthwhile Investment

Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.

What is the difference between Pentair 011018 and 011028?

The original 011018 Drive/software is no longer being produced or supported therefore the 011018 is being replaced by the 011028 energy Star certified: Meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency & the U.S. Department of energy Energy saving to 90%* versus traditional pumps 8 …

How do I identify my Pentair pool pump?

Do you run pool pump while swimming?

Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.

Can I replace my pool pump myself?

A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.

What RPM should I run my Pentair pool pump?

Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.

What is the advantage of a 2 speed pool pump?

Two-speed pool pumps are more energy-efficient than a single-speed pump, and work best on pools with water features. They run at two fixed speeds, high and low, and require a separate device such as an automation system to adjust between the two speeds.

What are the parts of a pool pump called?

So let’s break down the parts of a pump and see how they contribute to the overall functionality.

• The Housing. Inside a Pool Pump Housing. …
• Lid. …
• Strainer Basket. …
• Gaskets & Seals. …
• Seal Plate. …
• Motor. …
• Impeller. …
• Diffuser.

How many hours should I run my variable speed pool pump?

However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.

What size pool pump do I need for a 30 000 gallon pool?

Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.

How long do pool pump O rings last?

What causes a pool pump to burn out?

A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.

How much does a Pentair pool pump cost?

If you want to get a high energy-efficient pool pump that has proven its high performance, you can purchase one of Pentair’s pool pumps for $600 to $1,200.

Is it worth upgrading to a variable speed pool pump?

A Worthwhile Investment

Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.

Can a pool pump be too powerful?

The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.

How much does a Pentair variable speed pump cost?

Compare with similar items

	This item Pentair SuperFlo® VS Variable Speed Pool Pump, 342001	Hayward W3SP2603VSP Super Pump VS Variable-Speed Pool Pump, 1.65 HP
	Add to Cart	Add to Cart
Customer Rating	4.6 out of 5 stars (1254)	4.3 out of 5 stars (72)
Price	$1,129.00	$1,249.00
Sold By	ePoolSupply	In The Swim Pool Supplies

How often do pool motors last?

Can I replace a 1.5 HP pool pump with a 1hp?

Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.

What is the difference between 1hp and 1.5 hp motor?

So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).

Can a pool pump be too big?

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

What is the difference between 1 HP and 1.5 HP pool pump?

So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).

How do you know if your pool pump is burnt out?

How do you know when your pool pump needs to be replaced?

Signs You Need Pool Pump Replacement

1. Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
2. Grinding or Screeching Sounds. …
3. Blowing Bubbles and Spitting Water. …
4. Old Age. …
5. Get a New Pool Pump Now to Keep Enjoying Safe Water.

What is difference between 1hp and 2hp motor?

One horsepower equals 1.36 Newton-meters of torque at 5252 RPM. A two horsepower motor would have 2.36 Newton-meters of torque at 5252 RPM. A typical 1 HP 2875 RPM motor would have 2.49 Newton-meters of torque.

Why does my pool pump have two speeds?

How are the two speeds used? The low-speed setting is used to meet the general, day-to-day swimming needs circulate and chlorinate. High-speed settings are used when heating the water, cleaning the pool,water features, or when you have a large bather load.

Which brand pool pump is best?

• BEST OVERALL: Hayward W3SP2610X15 Super Pump Pool Pump.
• BEST BUDGET: Pool Pump by Blue Torrent, 1 HP Maxiforce In Ground.
• BEST SINGLE SPEED: Hayward W3SP2307X10 MaxFlo XL Pool Pump.
• BEST DUAL SPEED: XtremepowerUS 2HP In-Ground Pool Pump.
• BEST VARIABLE SPEED: Hayward W3SP2303VSP MaxFlo Variable-Speed Pool Pump.

Why does my pool pump keep overheating and shutting off?

A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.

How much HP should my pool pump have?

Based on the data calculated above for a typical RECTANGULAR pool, we are looking for a pump that will handle 42GPM with a 47 Feet of Head. According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM).

What size pump do I need for my pool?

Sizing the Pump for Your Swimming Pool

1. Circular Pools: Diameter (ft.) x Diameter (ft.) x Average Depth (ft.) x 5.9 = Total pool capacity in gallons.
2. Oval Pools: Length (ft.) x Width (ft.) x Average Depth (ft.) x 6.7 = Total pool capacity in gallons.
3. Rectangular Pools: Length (ft.) x Width (ft.) x Average Depth (ft.)

How long do Pentair booster pumps last?

Where is the model number on a Pentair pump?

Pump Model Number – The Pump Model Number is located on the “wet end” aka front housing of the pool pump. This is typically stamped in the pump housing or on a sticker label.

How do you know if your pool pump is going out?

Signs You Need Pool Pump Replacement

• Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
• Grinding or Screeching Sounds. …
• Blowing Bubbles and Spitting Water. …
• Old Age. …
• Get a New Pool Pump Now to Keep Enjoying Safe Water.

How much does labor cost to replace a pool pump?

Do it yourself pool pump replacement involves the cost of the replacement pump, which may run from $150 to $800 or more depending on the type of pool pump and the size of the pool. When they hire a professional, the cost will include labor, which can additionally cost $80 to $200.

How much does it cost to run a pool pump 24 hours a day?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.

Is Pentair and Sta rite the same company?

The Sta-Rite brand exists since 1934 and is sold in over 100 countries worldwide. In Europe, Pentair already produces a wide range of Sta-Rite swimming pool pumps and cleaners for its pool division, which have gained a reputation for quality and durability.

What RPM should I run my pool pump?

If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.

How much are pool pump motors?

Pool Motor Cost

A new pool motor costs $300 on average, with most models ranging from $100 to $500 (materials only). If your pool pump stops working, you might only need to replace the motor instead of the entire system.

Can I just replace pool pump motor?

The task of replacing a pool pump motor can be difficult, but we’re here to make sure you get it done as quickly, easily, and successfully as possible. Make sure the power to the pump is turned off before beginning the replacement. Make sure you’ve got the correct tools to disassemble and reassemble the parts involved.

Can I replace a 1.5 HP pool pump with a 2hp?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

How long does a Pentair Intelliflo pump last?

What is Pentair thermal mode?

The sensor for Thermal Mode is in the drive, on top of the motor. This feature allows you to set a speed (450- 3450 RPM) or flow (20-140 GPM) that runs when the IntelliFlo® VSF Variable Speed and Flow Pump goes into Thermal Mode. The temperature level that you wish Thermal Mode to start can also be set.

Can I replace a 3/4 HP pool pump with a 1 HP pool pump?

Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.

Is a larger pool pump better?

A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.

How many gallons per minute does a 3/4 HP pump?

Horsepower: 3/4. Flow: 10 GPM @ 100′ with 50 PSI discharge pressure.

How much does it cost to replace a pool pump?

On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.

What is the pool pump basket?

The pump basket is located in the pump housing assembly, and its purpose is to collect large debris that the skimmer missed or debris that was sucked through the main drain. This humble basket prevents debris from entering the pump assembly and clogging the impeller.

Can I replace a 1.5 HP pool pump with a 2.0 HP?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

How do I know if my pool pump needs replacing?

Signs You Need Pool Pump Replacement

1. Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
2. Grinding or Screeching Sounds. …
3. Blowing Bubbles and Spitting Water. …
4. Old Age. …
5. Get a New Pool Pump Now to Keep Enjoying Safe Water.

How do you unlock Pentair pool pump?

TO UNLOCK THE PUMP:

Press and hold the “1” and Quick Clean buttons for atleast 3 seconds. “Enter Loc Code” will scroll across the screen.

How do you know if you need a new pool motor?

Signs You Need Pool Pump Replacement

1. Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
2. Grinding or Screeching Sounds. …
3. Blowing Bubbles and Spitting Water. …
4. Old Age. …
5. Get a New Pool Pump Now to Keep Enjoying Safe Water.

Can my pool pump be too powerful?

Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.

How much does it cost to replace bearings in a pool pump?

With the cost of parts at roughly $30 (including the shaft seal), a bearing job can be an inexpensive fix. A caveat: It’s not uncommon for a bearing replacement to last less than a year. Also, the more times a bearing is replaced, the less likely it would seat in the end bell properly.

Is a higher HP pool pump better?

A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.

What does a diffuser do on a pool pump?

DIFFUSER. The Diffuser (16) encloses the impeller, to focus the draw of water into the impeller eye, and control the flow out of the impeller with a series of stationary vanes. The Diffuser seals the impeller eye up to the back of the Pump Housing (1), to create suction.

How do you know when you need a new pool pump?

Signs You Need Pool Pump Replacement

1. Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
2. Grinding or Screeching Sounds. …
3. Blowing Bubbles and Spitting Water. …
4. Old Age. …
5. Get a New Pool Pump Now to Keep Enjoying Safe Water.

How much does it cost to replace a pump for a swimming pool?

Pool pump installation costs between $700 and $1,500, or $1,100 on average. A single-speed pump can cost as low as $500 to replace, whereas a high-end pump or a project that requires new plumbing can run upwards of $5,450. A pool pump filters pool water to keep it fresh and sanitary for swimming.

What size filter do I need for a 10000 gallon pool?

Filter Size

A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.

How do you wire a Pentair Whisperflo pool pump?

How do I reset my Pentair IntelliConnect?

Power down the IntelliConnect for ten (10) seconds to reset access point mode and proceed to Step 14 for recommendations on improving the signal/connection strength.

What is the average life of a pool pump?

What size pump do I need for my 18 foot pool?

For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.

How long do Pentair variable speed pool pumps last?

How do I know if my pool pump motor is bad?

Your pump could be leaking water, or the bearings might need to be replaced instead of the entire motor. Screeching is also a sign that your motor bearings need to be replaced. These loud, often painful sounds could also be a sign of rust or oxidation, making it more difficult for the bearings to do their job.

What are the benefits of a 2 speed pool pump?

The two speed pump gives the pool owner the ability to filter the water more often (24/7) during the hottest months, thus assuring that it stays clear of debris and sparkling clear. As a result, the pool owner will spend less money on chemicals like algaecide, chlorine and/or clarifier.

How deep can a 2 HP well pump go?

A 70 meter deep (230 ft deep) well can be served by a 2 hp. submersible pump delivering about 30 gpm but at close to zero discharge pressure! To get to a 20 psi discharge pressure a typical submersible in the 3 hp. range can deliver 35 gpm, and at 40 psi discharge pressure, the same pump will deliver about 30 gpm.

How much does a pool pump cost to replace?

On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.

How much does a new pool pump cost?

On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.

How do you manually start a Pentair pool pump?

To operate in Manual mode, press one of the four speed buttons and then press the Start/Stop button. The pump will run the assigned speed for that speed button. Speeds 1-4 can be programmed to run at a certain speed and for a duration of time once a speed button is pressed.

How do I remove a Pentair pump motor?

How do I remove my pool pump motor?

Should pool pump be on when swimming?

Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.

What size breaker do I need for a 230 volt pool pump?

How do you know if your pool pump is bad?

Don’t Wait to Call for Swimming Pool Pump Replacement

1. Age. Yes, the age of your pump is an early trouble sign. …
2. Noise. Your pool pump should run quietly. …
3. Power Trip. Has your pool pump motor started to trip your electric breaker box more and more frequently? …
4. Swimming Pool Pump Motor Keeps Shutting Off. …
5. Loss of Suction.

How do you know when a pool pump is going bad?

Signs You Need Pool Pump Replacement

1. Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
2. Grinding or Screeching Sounds. …
3. Blowing Bubbles and Spitting Water. …
4. Old Age. …
5. Get a New Pool Pump Now to Keep Enjoying Safe Water.

How does Pentair freeze protection work?

The system detects all devices that have Freeze Protection ON, and activates the device to stop the pipes from freezing. If freeze protec- tion is only applied to one body of water. Note: If the pool or spa is running a schedule or operated manually, this will override freeze protection.

How much does a variable speed pool pump cost?

How do I calculate what size pool pump I need?

Sizing the Pump for Your Swimming Pool

1. Circular Pools: Diameter (ft.) x Diameter (ft.) x Average Depth (ft.) x 5.9 = Total pool capacity in gallons.
2. Oval Pools: Length (ft.) x Width (ft.) x Average Depth (ft.) x 6.7 = Total pool capacity in gallons.
3. Rectangular Pools: Length (ft.) x Width (ft.) x Average Depth (ft.)

Are pumps better at pushing or pulling?

The general rule for pumping is always push. It’s much harder to pull and, if you need to regularly pull air out of the tube before water makes it to the pump, it is especially hard and some pumps simply cannot do it.

What is a variable speed pool pump?

Variable speed pool pumps are becoming a more popular option among pool owners. They allow you to run your pump at different speeds. Unlike a single-speed pump, you can set the system to run on high when you are filtering chemicals or on low when your pool needs to be cleaned during peak energy use hours.

Can I replace a 1.5 HP pool pump with a 2 hp?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

How much is a new pool pump?

Pool pump installation costs between $700 and $1,500, or $1,100 on average. A single-speed pump can cost as low as $500 to replace, whereas a high-end pump or a project that requires new plumbing can run upwards of $5,450.

How do I know what pool pump I have?

How long does a pool pump motor last?

How long does a pump motor last? Most pool pump motors last at least 6-8 years, often longer. But that’s if you’re referring to magnetic drive pool motors, which are used in newer variable speed pumps.

How do I change the schedule on my IntelliFlo pump?

Where is the serial number on my Pentair pool pump?

You will need your serial number to register your Pentair IntelliFlo VSF pump. You will find this on a silver tag on the side of the pump housing.

Is it worth fixing a pool pump?

When determining the magic number of replacement parts cost versus the cost of the whole pump, we generally suggest 60-75% as the standard. If the cost to repair is within or over this range, it is smarter to replace the pump. This way you have a brand new pump and warranty covering any mishaps down the line.

Where is the model number on a Pentair pool pump?

You may find your serial number located on the product or the packaging. and in some cases, serial number may be on your receipt.

How many gpm does a 2.5 HP pool pump?

What do the numbers on a pool pump mean?

The first format is one that follows the line of UST1102 and ST1152. The UST stands for an uprated motor, “ST-” translates to full rated. The same applies to square flange motors that begin with USQ and SQ. The last four digits show its HP: -1102 = 1 HP, -1152 = 1.5 HP, -1202 = 2 HP and so on.

Why does my pool pump keep tripping off?

The most common reasons for a pool pump circuit breaker to trip are an overloaded motor, underrated pump breaker, bad motor windings or other earthing issue, moisture in the motor or moisture in the wiring.

How much does it cost to have a pool pump installed?

How do you remove a motor from a pool pump?

What are all the parts to a pool?

Seven Essential Pool Parts

• skimmer.
• main drain.
• suction line(s)
• pump.
• filter.
• return lines.
• return jets.

What happens if you oversize a pool pump?

A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.

Does HP matter for pool pump?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

How long should a pool pump motor last?

How long does a pump motor last? Most pool pump motors last at least 6-8 years, often longer.

What RPM should my pool run at?

The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.

How far does electrical have to be from pool?

Receptacles for pumps and motors must be located between 6 and 10 feet from the pool walls, and they must be GFCI-protected and locked. Outlet receptacles for general use can be no closer than 20 feet from a pool or in-ground spa if they are not GFCI-protected, and no closer than 6 feet away if they are GFCI protected.

How many GPM is a 2.5 HP pool pump?

	This item Happybuy Swimming Pool Pump 2.5HP 1850W Above Ground Swimming Pool Pump 148GPM Single Speed Filter Pump for Spa Water Circulation
Price	$18999
Sold By	Amazon.com
Item Dimensions	22 x 15 x 11 inches
Size	2.5HP / 148 GPM / 1500W

How many GPM will a 3/4 HP pump?

3/4 HP Submersible 3-Wire Motor 10 GPM Deep Well Potable Water Pump

Brand	Everbilt
Material	Stainless Steel
Style	Submersible
Power Source	Ac/dc
Maximum Flow Rate	10 Gallons Per Minute

How can you tell if your pool pump is going bad?

Signs You Need Pool Pump Replacement

• Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
• Grinding or Screeching Sounds. …
• Blowing Bubbles and Spitting Water. …
• Old Age. …
• Get a New Pool Pump Now to Keep Enjoying Safe Water.

Can I replace a 3/4 HP pool pump with a 1 hp pump?

Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.

Which swimming pool pump is best?

• BEST OVERALL: Hayward W3SP2610X15 Super Pump Pool Pump.
• BEST BUDGET: Pool Pump by Blue Torrent, 1 HP Maxiforce In Ground.
• BEST SINGLE SPEED: Hayward W3SP2307X10 MaxFlo XL Pool Pump.
• BEST DUAL SPEED: XtremepowerUS 2HP In-Ground Pool Pump.
• BEST VARIABLE SPEED: Hayward W3SP2303VSP MaxFlo Variable-Speed Pool Pump.

What is the best way to program a Pentair Intelliflo pool pump?

How do you control a 2 speed pool pump?

Who makes Pentair pumps?

Sta-Rite | Brands | Pentair.

Where do I find my pool pump model number?

What information do you need?

1. Pump Model Number – The Pump Model Number is located on the “wet end” aka front housing of the pool pump. …
2. Motor CAT Number – The CAT (catalog) Number is located on the motor itself. …
3. Motor Model or Part Number – The Motor Model or Part Number is also located on the motor label.

How long do you need to run a pool pump?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.

How do I reset my Pentair easy touch?

Why does my Pentair pump keep shutting off?

Overheating. For safety reasons, many pool pumps are designed to shut off automatically if they begin to overheat. The mechanisms that perform this task are known as thermal overload switches. If your pump continues to shut off, it could mean that the thermal overload switches are going bad.

Why does my pool pump keep stopping?

Overheating. For safety reasons, many pool pumps are designed to shut off automatically if they begin to overheat. The mechanisms that perform this task are known as thermal overload switches. If your pump continues to shut off, it could mean that the thermal overload switches are going bad.

What RPM should pool pump run at?

The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.

What size pump do I need for a 30000 gallon pool?

Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.

How long should my pool pump run?

How do I program my Pentair Whisperflo pool pump?

What is the impeller on a pool pump?

How do I reset my Pentair IntelliFlo VSF?

To reset the pump to the factory default settings:

1. Ensure that the pump is powered on and the green power LED is on.
2. Press the Stop button to stop the pump.
3. Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.

Should I turn off pool pump when raining?

To prevent potentially dangerous electrical issues, it’s imperative that you turn off the power to your pool equipment — such as pumps, motors, filters, heaters, chlorinators, and lighting fixtures. Even if you turn off the power to your pool equipment, it can still be damaged by wind, rain, and debris.