How long is a Dolphin e10 cleaning cycle?

It’s self-contained, so you don’t need to connect it to your primary pump system. This makes for a hassle-free pool-cleaning experience. It has a ninety-minute cleaning cycle.

>> Click to read more <<

Consequently, why is my automatic pool vacuum not moving?

If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.

Keeping this in consideration, how long should your pool cleaner run? The rule of thumb for pool maintenance is to run your pump for eight hours per day.

Beside this, can I leave my dolphin pool cleaner in the pool?

This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

How often should I run my dolphin pool cleaner?

Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.

Can you use a dolphin pool cleaner in above ground pool?

Effortlessly enjoy your pool

The Dolphin Escape is specifically designed to clean above ground pools, effortlessly.

Can you swim while robotic pool cleaner?

You can swim while your bot cleans the pool, but it’s better not to. Swimming churns up the water. If the machine is in the water at the time, the current will buffet it, making it harder for it to complete its work. It’ll have to work harder to cover the same ground.

How do I reset my dolphin?

Press and hold “Blue” and “Call” buttons to cold boot the Dolphin. Upon cold boot, when the display returns, type: 1277. A little menu will appear showing the reset options.

How do you troubleshoot a Dolphin pool cleaner?

Troubleshooting

  1. Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
  2. Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
  3. Turn the power supply off. …
  4. Unplug the power supply.

How do I clean my dolphin filter?

Why is my dolphin pool cleaner not climbing walls?

My Dolphin Won’t Climb Walls / Gets Stuck

Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.

Leave a Comment