How long do pool pumps last? Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.
Also, how many gallons per minute does a 1.5 HP pool pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).
Furthermore, can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
Can I replace my 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
Can I replace a 1.5 HP pool pump with a 2.0 HP?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Which is better Pentair vs Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What is the flow rate of a Hayward Super pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 2.5″ | 120 |
| 3″ | 180 |
| 4″ | 305 |
How long do Pentair pumps last?
Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years. Modern pumps are made of hard plastic and will over time warp.
Can you replace a 1.5 HP pool pump with a 2hp?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
What is the difference between 1 HP and 1.5 HP pool pump?
As I mentioned before, the 1.5 HP PowerFlo LX has only 1 GPM more flow rate than the 1 HP PowerFlo LX so very little difference between the two pumps. However, for an 18″ filter, you don’t want to exceed more than about 35 GPM.
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
How can you tell if your pool pump is going bad?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
What is the difference between 1hp and 1.5 hp motor?
So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).
Can I replace a 1.5 HP pool pump with a 1hp?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
Can my pool pump be too powerful?
The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.
How long do Hayward pool pumps last?
Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years.
Where are Pentair pool pumps made?
Our manufacturing plant located in Houston, TX, USA, produces products for industrial, pneumatic, fluid process, and hydraulic applications.
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
How long should a Hayward pool pump motor last?
Can I replace a 1.5 HP pool pump with a 1 hp?
Conclusion. So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
How do you troubleshoot a Hayward pool pump?
How to Troubleshoot a Hayward Pool Pump
- Step 1: Check the Hoses. Tighten all hose connections on the pump and filter. …
- Step 2: Inspect the Pressure Gauge. …
- Step 3: Check the Skimmer Basket. …
- Step 4: Remove Debris. …
- Step 5: Inspect the Impeller. …
- Step 6: Backwash the Filter. …
- Step 7: Replace the Sand or DE.
How long is the warranty on a pool pump?
WARRANTY CARD
| PRODUCT/PRODUCT CATEGORY | LENGTH OF WARRANTY | REQUIRES PROFESSIONAL INSTALLATION |
|---|---|---|
| Single-Phase, TEFC Super Duty Pumps | 2 Years | ✓ |
| SVRS Pumps | 2 Years | ✓ |
| SuperFlo® VS, SuperFlo® VST and SuperMax® VS Variable Speed Pumps | 2 Years | ✓ |
| IntelliFlo (#011018, #011028, #011059, #011060 and IntelliPro (#P6E6VS4H-209, #013028) | 2 Years | ✓ |
Is Pentair better than Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What happens if your pool pump is too big for your pool?
Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.
What is the difference between a Hayward Super pump and Super pump 2?
Do pool pumps lose power over time?
Over time, older pumps can begin to deteriorate and lose power. In other cases, you might need to clean the filter or have it backwashed.
How do you wire a Pentair Whisperflo pool pump?
Do variable speed pumps last longer?
What is the normal pressure of a Hayward pool pump?
Generally speaking, a pressure reading between 10 – 25 psi can be considered normal. Once you have installed a new filter, turn everything on and take a baseline reading. Each time that you change your pool filter take a new baseline reading.
Who makes Whisperflo pool pumps?
| Product Dimensions | 30.1 x 12.3 x 14.6 inches |
|---|---|
| Item Weight | 50 pounds |
| Manufacturer | Pentair |
| ASIN | B000QHHQMC |
| Item model number | 011774 |
How long is a Hayward pool pump warranty?
How big of a pump do I need for my above ground pool?
Round Above Ground Pool:
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
What size pump do I need for my pool?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
What does a Hayward Super pump do?
Their heavy-duty, high-performance motor and airflow ventilation provide quieter, cooler, more efficient operation for virtually any pool or spa, while their exclusive service-ease design offers quick 4-bolt access to all internal components.
How long does a Hayward pool motor last?
Old Age. Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.
Is Hayward a good pool pump?
Hayward SP2610X15 1.5 HP Inground Pool Pump — Best Overall
It is recognized across the industry as one of the best inground pool pumps due to its reliability and performance. On top of this, it is extremely efficient thanks to its balanced Noryl impeller.
Is a variable speed pool pump worth it?
A Worthwhile Investment
Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
How much water does a 1.5 HP pool pump move?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM). Make sure the the lines going back to the pool will also support the same level of flow. In the diagram to the right, the system is plumbed in 2.0 inch pipe.
What is the flow rate of a 1.5 HP pool pump?
This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.
What speed should you run your variable speed pool pump at?
If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.
How do you know if your pool pump motor is bad?
Don’t Wait to Call for Swimming Pool Pump Replacement
- Age. Yes, the age of your pump is an early trouble sign. …
- Noise. Your pool pump should run quietly. …
- Power Trip. Has your pool pump motor started to trip your electric breaker box more and more frequently? …
- Swimming Pool Pump Motor Keeps Shutting Off. …
- Loss of Suction.
How many hours should I run my pool pump?
What is the difference between 1hp and 2hp motor?
One horsepower equals 1.36 Newton-meters of torque at 5252 RPM. A two horsepower motor would have 2.36 Newton-meters of torque at 5252 RPM. A typical 1 HP 2875 RPM motor would have 2.49 Newton-meters of torque.
Where are Pentair pool pumps manufactured?
Our manufacturing plant, located in St. Paul, Minneapolis, USA, produces products for fluid processing, respiratory, membrane, blood line and systems.
Can my pool pump be too strong?
Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.
How many years does a variable speed pool pump last?
Old Age. Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.
How long do you need to run a pool pump?
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.
Should pool pump be hot to touch?
Under normal operating conditions, the motor end of the pump is hot enough that you can barely touch it — but not searing hot. If you check your pool pump motor and find it is far too hot to be able to touch with your hand, that’s not good.
What size sand filter do I need for a 1.5 HP pump?
Filter Sizing Chart #2
| Pool Gallonage | Pump Size | Recommended Filter Size |
|---|---|---|
| 15,000 | 1.0 hp | Cartridge – 100-200 Sq. Ft. Sand – 3.0 Sq. Ft DE – 36 Sq Ft |
| 20,000 | 1.5 hp | Cartridge – 300-400 Sq. Ft. Sand – 3.9 Sq. Ft DE – 48 Sq Ft |
| 25,000 | 1.5 hp | |
| 30,000 | 2.0 hp | Cartridge – 400-500 Sq. Ft. Sand – 4.9 Sq. Ft DE – 60 Sq Ft |
Can you oversize a pool pump?
The only real problem with an oversized pump is that it uses more electricity than a smaller pump would to do the same job. Unless you have a spa or waterfall or some other water feature, a 2 HP pump is larger than what you really need and costs more to run than a smaller pump would cost.
Can I replace a 1.5 HP pool pump with a 1 HP pool pump?
Conclusion. So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
How much money do you save with a variable speed pool pump?
For a relatively small investment, a variable speed pool pump can reduce pool pump energy use by 50% to 75%. The majority of the savings is derived from a variable speed pump’s ability to reduce the rpm of the motor, thus reducing energy use.
How many gallons per hour does a 1.5 HP pool pump?
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 0.5 HP | 40 | $0.03 |
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
Can I use inground pool pump for above ground pool?
Can you use an aboveground pool pump on an inground pool? Sure you can, as long as the pump is at or below the pool water level, and you have a very small pool.
How much does a Hayward pool pump cost?
How many gallons per minute is 1.5 HP pool pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).
What is difference between 1hp and 1.5 HP water pump?
So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).
What size pump do I need for a 24 above ground pool?
Round Above Ground Pool:
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
Why does my pool pump keep stopping?
There are several reasons why your pump may randomly shut off—a behavior known as “pump tripping.” Most commonly, your pump may be operating at the wrong voltage, overheating, or simply failing to compete with your neighborhood’s electrical needs.