| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 0.5 HP | 40 | $0.03 |
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
Similarly one may ask, what is the flow rate of a 1.5 HP pool pump?
This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.
| Motor Horsepower | 1.5 Hp |
|---|---|
| Motor Phase | Single Phase |
| Discharge Outlet Size | 50 mm or 2 inch |
| Capacity | 15 to 50 m |
| Maximum Discharge Flow | 100 – 500 LPM |
One may also ask, how much HP pump do I need?
Example – Horsepower Required to Pump Water
| Power Required to Pump Water (hp) | ||
|---|---|---|
| Volume Flow (gpm) | Height (ft) | |
| 10 | 0.0126 | 0.0379 |
| 15 | 0.0189 | 0.0568 |
| 20 | 0.0253 | 0.0758 |
How do I know what GPM my pool pump is?
Most pool pump specifications are expressed in gallons per minute (GPM). So, to convert from GPH to GPM, divide your GPH by 60 minutes – 2531 GPH / 60 = 42.2 GPM.
How do I calculate pool pump flow rate?
Divide the pool gallonage by the turnover rate to determine the minimum flow rate per hour. Divide that number by 60 to determine the minimum flow rate per minute.
How many GPM is a Hayward pool pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 4″ | 305 |
How many GPH does a 1.5 HP pool pump?
1.5 HP 8350 GPH 3450 RPM Powerful Above Ground Swimming Pool Pump with Strainer Basket.
How many gallons per minute does a 2 HP pool pump?
How many liters per minute does a 1.5 HP pump pumps?
My 1.5 HP pump pumps approx 14 L/min and I have purchased 40L/min flow sensors.
How do I calculate gallons in my pool?
Length x width x average depth x 7.5 = volume (in gallons)
Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.
How many gallons per minute does a 1.5 HP pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM). Make sure the the lines going back to the pool will also support the same level of flow. In the diagram to the right, the system is plumbed in 2.0 inch pipe.