How many GPH is a 1.5 HP pool pump?

Pool Pump Operating Costs

Pump Size GPM (varies with plumbing) Cost/Hour
1.0 HP 60 $0.06
1.5 HP 68 $0.09
2.0 HP 76 $0.12
3.0 HP 85 $0.18

>> Click to read more <<

Similarly one may ask, what size pool pump do I need for a 30 000 gallon pool?

Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.

Simply so, how many amps is a Hayward 1.5 HP pool pump? 1 HP is 746 watts x 1.5 HP = 1,119 watts. 1,119watts ÷ 120volts= 9.325 amps.

In respect to this, how many amps does a Hayward pool pump use?

How Much Electricity Does Pool Equipment Use? If you need to know the electrical requirements for your inground pool, here is a list of common pool equipment and the approximate volts and amps required for each: Pool Pump: 240v, 10amps. Salt Water Chlorinator: 240v, approx 5-8 amps.

Can a pump be too big for a pool?

Sizing the Pump for Your Swimming Pool

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

Is a 1.5 HP pool pump good?

A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons. A massive 2-horsepower pump can clean pools up to 46,000 gallons.

How many gallons per minute does a Hayward Super pump?

7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.

Pipe Size Max GPM
2″ 85
2.5″ 120
3″ 180
4″ 305

What size pump do I need for my 18 foot pool?

For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.

Can I replace my 1 HP pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.

What is the flow rate of a 1.5 HP pool pump?

Hayward Super Pump (1.5hp)

This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.

How many amps is a 1.5 HP pool pump?

For example, some 1.5 Horsepower pool pumps draw 17 amps of energy in their initial start-ups and then drop back to their actual amperage after a while. However, not all pool motors require this size. A 15-amp CB can be sufficient unless users regulate other pool equipment with this breaker.

What breaker do I need for pool pump?

The National Electric Code requires that all swimming pool pumps be connected to a GFCI breaker.

Leave a Comment