4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 4″ | 305 |
Keeping this in consideration, how do you read a Hayward serial number?
Serial numbers for these products typically follow a format like this: 1M12345-1234567 (all numbers with the exception of the letter in the second position). For warranty registration purposes, please enter the serial number without the hyphen or any spaces (i.e. 1M123451234567).
Simply so, what size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
What is the difference between Hayward Super pump and Super pump II?
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What does a Hayward Super pump do?
Hayward in-ground pumps are self-priming centrifugal pumps. These pumps have a vacuum chamber, commonly known as a pump housing. The pump housing must be filled with water in order to create a vacuum, resulting in the pump drawing the water out of your pool or spa.
How do I know what type of pool pump I have?
The easiest way to determine your pump model is by finding the part number on the strainer lid. The lid may be unique to your style pump in that case you already have part of the equation. With that information you would only require the horsepower of the pump to determine a suitable motor match.
Is Pentair better than Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
How do I identify my Hayward pool pump?
How many gpm does a 1.5 HP pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM). Make sure the the lines going back to the pool will also support the same level of flow. In the diagram to the right, the system is plumbed in 2.0 inch pipe.
Should pool pump be hot to touch?
Under normal operating conditions, the motor end of the pump is hot enough that you can barely touch it — but not searing hot. If you check your pool pump motor and find it is far too hot to be able to touch with your hand, that’s not good.
What is the flow rate of a 1.5 HP pool pump?
This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.