How much does it cost to maintain a vinyl pool?

How much does it cost to own a vinyl liner pool per year? Aside from periodic liner replacements, you can expect to spend around $700 per year on vinyl liner pool maintenance. This is mostly split between the cost of chemicals and electricity, which will both vary based on the pool and the area in which you live.

>> Click to read more <<

Just so, how often do you need to change pool water?

Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.

Secondly, can you use chlorine tablets in a vinyl pool? Chlorine tablets such as dichlor and trichlor can damage vinyl liner pools if they come in contact with the liner. Chlorine tablets are often highly concentrated. As a result, they increase chlorine concentration which can bleach and weaken the liner’s vinyl material, greatly reducing its life.

Hereof, how long does a vinyl last in a pool?

The Balancing Act of Pool Maintenance

The typical lifespan of a vinyl liner is anywhere from 15-20 years and where your liner falls in that range depends, most crucially, upon your proper maintenance of the pool’s chemistry.

How long do inground vinyl pools last?

6-12 years

Can I put bleach in my vinyl pool?

It is okay to use bleach as a lot of us who own vinyl liners do so. Add CYA/stabilizer to 30ppm to buffer the FC and you’re good to go.

Is owning a pool worth it?

Resale Value

A pool can increase not only your social worth but also the value of your home. However, the increase is probably not as much as you think. According to HouseLogic, there’s no real guarantee that you’ll make your money back. In fact, adding a swimming pool may only increase your home’s value by 7%.

Do I need calcium in a vinyl pool?

For vinyl pools, calcium should be between 150-250 ppm. A low level can result in foaming, which is unpleasant but shouldn’t harm the liner. If calcium hardness goes above 400 ppm, you will likely see a white, flaky crust on the liner and pool equipment.

What chemicals do you need for a vinyl pool?

Recommended Chemical Levels for LOOP-LOC Pool Liners:

  • pH (between 7.2 and 7.6)
  • Total Alkalinity (between 80 and 125 ppm)
  • Calcium Hardness (between 175 and 250 ppm minimum)
  • Free Chlorine Residual (between 1.0 and 1.5 ppm)
  • Cyanuric Acid (between 40 and 75 ppm)
  • Never mix chemicals together.

How often should you replace pool liner?

between 6-12 years

Can you shock a vinyl pool?

If your pool’s liner is made of vinyl, you’ll need to be careful about using too much shock. To avoid vinyl damage, you can mix shock with water in a bucket and make sure it’s completely dissolved before adding it to your pool. This will help the granules mix into the water better.

Can you use salt water in a vinyl pool?

If you have a vinyl liner, you’ll be happy to know you can use a salt chlorinator system in your pool without taking any extra precautions. The liner will be exposed to lower levels of chlorine, so it may even extend your liner’s lifespan.

Leave a Comment