With that in mind, a 0.5-horsepower pump with 40 feet of head resistance is suitable for small pools up to 11,000 gallons. A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons.
Besides, can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
Simply so, what does a Hayward Super pump do?
Their heavy-duty, high-performance motor and airflow ventilation provide quieter, cooler, more efficient operation for virtually any pool or spa, while their exclusive service-ease design offers quick 4-bolt access to all internal components.
How long should a Hayward pool pump motor last?
What size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
What is the difference between 1hp and 1.5 hp motor?
So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).
Can I replace a 1.5 HP pool pump with a 1 hp?
Conclusion. So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
Can my pool pump be too powerful?
The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.
How long does a Hayward pool motor last?
Old Age. Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.
How many gallons per minute does a 1.5 HP pool pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).
How much does a 1.5 HP pool pump cost?
$1.36 per day x 365 days = $496 per year to Operate a 1-½ HP Variable Speed Pump. Cost to Operate 1-½ HP Single Speed Pool Pump $1,062 / yr Vs. Cost of Variable Speed Pump $496 / year.
How long should a 1.5 HP pool pump last?
How long do pool pumps last? Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.
What is the flow rate of a 1.5 HP pool pump?
This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.
Is Pentair better than Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
How can you tell if your pool pump is going bad?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
Can you oversize a pool pump?
The only real problem with an oversized pump is that it uses more electricity than a smaller pump would to do the same job. Unless you have a spa or waterfall or some other water feature, a 2 HP pump is larger than what you really need and costs more to run than a smaller pump would cost.
Can I replace a 1.5 HP pool pump with a 1hp?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
How long is a Hayward pool pump warranty?
Can my pool pump be too strong?
Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.
What is the normal pressure of a Hayward pool pump?
Generally speaking, a pressure reading between 10 – 25 psi can be considered normal. Once you have installed a new filter, turn everything on and take a baseline reading. Each time that you change your pool filter take a new baseline reading.
Can a pump be too big for a pool?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What is the difference between 1hp and 2hp motor?
One horsepower equals 1.36 Newton-meters of torque at 5252 RPM. A two horsepower motor would have 2.36 Newton-meters of torque at 5252 RPM. A typical 1 HP 2875 RPM motor would have 2.49 Newton-meters of torque.
What size pump do I need for my pool?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
Can I replace my 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
How long do Pentair pumps last?
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
How much does a Hayward pool pump cost?
How many gpm does a 1.5 HP pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Which is better Pentair vs Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
Which is better Pentair or Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What is the GPM of a Hayward power Flo Matrix?
Hayward Power-Flo Matrix pump specifications
| Pump Output (GPM) | ||
|---|---|---|
| Model # | 10 ft. | 30 ft. |
| SP1591 | 80 | 64 |
| SP1592 | 86 | 75 |
| SP1593 | 91 | 80 |
Should pool pump be hot to touch?
Under normal operating conditions, the motor end of the pump is hot enough that you can barely touch it — but not searing hot. If you check your pool pump motor and find it is far too hot to be able to touch with your hand, that’s not good.
What is the difference between 1 HP and 1.5 HP pool pump?
As I mentioned before, the 1.5 HP PowerFlo LX has only 1 GPM more flow rate than the 1 HP PowerFlo LX so very little difference between the two pumps. However, for an 18″ filter, you don’t want to exceed more than about 35 GPM.
How many hours should my pool pump run?
How big of a pump do I need for my above ground pool?
Round Above Ground Pool:
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
How do you backwash Hayward power Flo Matrix?
What is the difference between 1hp and 1.5 HP pool pump?
So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet). For me, with my Hayward EC40 filter, low speed with the 1 HP works great because the filter is designed for 40 GPM.
What size sand filter do I need for a 1.5 HP pump?
Filter Sizing Chart #2
| Pool Gallonage | Pump Size | Recommended Filter Size |
|---|---|---|
| 15,000 | 1.0 hp | Cartridge – 100-200 Sq. Ft. Sand – 3.0 Sq. Ft DE – 36 Sq Ft |
| 20,000 | 1.5 hp | Cartridge – 300-400 Sq. Ft. Sand – 3.9 Sq. Ft DE – 48 Sq Ft |
| 25,000 | 1.5 hp | |
| 30,000 | 2.0 hp | Cartridge – 400-500 Sq. Ft. Sand – 4.9 Sq. Ft DE – 60 Sq Ft |
How long do Pentair pool pumps last?
How much electricity does a 1.5 HP pool pump use?
It’s not uncommon for a 1.5 horsepower pump to use 1500 – 2000 watts. This is unfortunate, because most pools only need 1/4 to 1/8th horsepower for circulation. Higher power may be needed for tasks like vacuuming the pool. Modern pool pumps like the EcoPump offer a circulation mode, and a vacuum mode.
Can I replace a 1.5 HP pool pump with a 2hp pump?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
How many gallons per hour does a 1.5 HP pool pump?
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 0.5 HP | 40 | $0.03 |
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
What size sand filter do I need for a 20000 gallon pool?
For sand filters on in-ground pools, I like to use a 30-inch tank diameter, which has a 4.9 sq. ft. filter surface area and holds 600 pounds of sand. For small pools (under 20,000 gallons), I might advise the next size down (24″ tank) if the budget is tight.
Can you replace a 1.5 HP pool pump with a 2hp?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Does the pool pump go before or after the sand filter?
When installing the pool sand filter, you will connect it right after the pump. Pool water will come in through the pool pump, be filtered through the sand filter and released to the chlorinator before returning back to the pool.
Where are Pentair pool pumps manufactured?
Our manufacturing plant, located in St. Paul, Minneapolis, USA, produces products for fluid processing, respiratory, membrane, blood line and systems.
What size pump does my above ground pool need?
Round Above Ground Pool:
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
Is it better to run pool pump at night?
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Is 1 HP pool pump enough?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Can I upgrade my pool pump?
Keep the pool as clean as possible with vacuuming, brushing and skimming. OR, you can upgrade your above ground pool filter and pump with something better.
What size pump do I need for a 27 foot above ground pool?
For round above ground pools up to 24 ft. ( pools with less than 15,300 gallons) use a 1 HP pump. For round above ground pools over 24 ft. (pools with more than 15.300 gallons) use a 1.5 HP pump.
What is difference between 1hp and 1.5 HP water pump?
So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).
How long does a Hayward pump last?
On average, pool pumps last eight to 12 years before needing replacement.
How many HP does a pool pump need?
According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM). Since we always go for the higher GPM, we would select the 1 HP pump.
How many years does a Hayward pool pump last?
Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years.
What is the flow rate of a Hayward Super pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
| Pipe Size | Max GPM |
|---|---|
| 2.5″ | 120 |
| 3″ | 180 |
| 4″ | 305 |
What size pump do I need for a 25000 gallon pool?
Calculate Flow Rate and Turnover
Flow rate is the number of gallons the pump moves per minute, and turnover is the minimum about of time to circulate all water through the filter. Your 25,000-gallon pool needs an output of 52 gallons per minute to circulate the water once every eight hours.
What size sand filter do I need for a 15000 gallon pool?
When choosing a pool filter for your above ground pool, a helpful tip is to choose one that is at least 1 sq. ft per 10,000 gallons pool capacity. For example: the ClearWater 16″ Sand Filter System has a 1.55″ sq. ft filtration area, making it perfect for a 15,000 gallon pool.
How long do Hayward above ground pool pumps last?
What is the difference between a Hayward Super pump and Super pump 2?
Can I replace a 2hp pool pump with a 1.5 HP?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
How do you replace a Hayward Super pump motor?
What causes a pool pump to burn out?
A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.