With this in mind, most cartridge filter systems are well suited for smaller pools of 10,000 gallons or less, including those that aren’t used year-round. Sand filtrations systems are ideal for larger permanent above-ground pools.
Secondly, how does a Hayward pool sand filter work?
Similarly, how do you maintain a pool with a sand filter?
In order for your sand filter to work optimally, it is important to clean the filter sand regularly.
- Stop the pump.
- Close the valves on the suction and return lines.
- Open the cover of the pump and empty the filter basket.
- Refit the cover.
- Open the valve to the drain outlet.
- Turn the lever to BACKWASH.
How big of a filter do I need for a above ground pool?
Filter Size
The filter flow rate must be rated at least the same GPM as your pump, or higher. With pool filters, it’s best to err on the larger size so it can handle the power of your pump. A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.
How big of sand filter pump do I need for my pool?
When choosing a pool filter for your above ground pool, a helpful tip is to choose one that is at least 1 sq. ft per 10,000 gallons pool capacity. For example: the ClearWater 16″ Sand Filter System has a 1.55″ sq. ft filtration area, making it perfect for a 15,000 gallon pool.
Can I replace a 1hp pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
What type of filter is best for an above ground pool?
Does the pool pump go before or after the sand filter?
When installing the pool sand filter, you will connect it right after the pump. Pool water will come in through the pool pump, be filtered through the sand filter and released to the chlorinator before returning back to the pool.
How far should pump be from above ground pool?
Stay close to the pool
Shorter pipe runs = less work for the pump which extends the life of the pump and uses less electricity. Our projects typically average a distance of 20–40 feet from the pool to the equipment, but as stated earlier, much longer runs are sometimes required.