What chemicals do I need to maintain my above ground pool?

Things you’ll be testing for include chlorine, PH, total alkalinity, Cyanuric acid (stabilizer), and calcium hardness. The levels need to be properly balanced for safe and clean water before swimming in it. The free chlorine level should be between 2.0 and 4.0 ppm. The PH level should be between 7.2 and 7.8.

>> Click to read more <<

Beside above, how long do above ground pools last?

A high-quality above ground pool from Valley Pool & Spa should last between 10 and 20 years depending on how well you care for it. However, your pool liner will not last as long as your pool. Contact a pool expert at our store to see if you need a new liner before you decide to replace your entire pool.

People also ask, how often should you change the water in an above ground pool? Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.

Likewise, people ask, how much does it cost to keep an above ground pool?

High-quality above ground pools can go for as much as $11,200. Above ground pools can usually be DIY projects, which means you can save hundreds of dollars on labor costs.

Average Cost of Above Ground Pools
Average Cost $2,850
Highest Cost $11,200
Lowest Cost $750

How often do you add chlorine to above ground pool?

Pool Maintenance (Ongoing)

Step 1: Always keep chlorine level in the safe range on your test strip. Test after daily. Run your pool filter at least 6 to 8 hrs every day.
Step 3: Add maintenance dose of algaecide per label instructions weekly.
Step 4: Add 2 oz of Super Clarifier per 5000 gallons of pool water each week.

Where do you put shock in above ground pool?

How do you maintain a pool by yourself?

How to Maintain Your Pool Yourself

  1. Skim the Surface. Use a skimmer to remove leaves, pollen, bugs, and other debris from the surface of the water. …
  2. Brush the Sides and Pool Floor. …
  3. Check pH Level. …
  4. Add Chlorine. …
  5. Clean Filter. …
  6. Maintain Water Level.

Leave a Comment