Freeze Protection: This function protects the pool, plumbing, and equipment against freeze damage. If Freeze Protection is enabled and the AIR temperature falls below the preset freeze protection temperature (see Filter Configuration), the Pro Logic will turn on the filter pump to circulate the water.
In this way, how do I turn off Freeze protect?
Also question is, how does freeze protection work?
What is a freeze protection pump?
A freeze protection pump is a pump. It’s purpose Depends on the system, but usually to maintain a certain amount of flow of your working fluid like chilled water through a coil to prevent freezing.
Does Hayward variable speed pump have freeze protection?
What do you do with pool pump in freezing weather?
Keep your pumps running at all times during freezing temperatures. Remove winterizing plugs from the pump, filter, heater and any other equipment that can be drained. Install a Freeze Protector, which is a device that circulates the pool water when temperatures are 38°F or below.
Will pool pipes freeze at 32 degrees?
If you have an above ground pool with the pool filter system and plumbing above ground (like nearly all above ground pools), pipes and pumps can freeze up in less than an hour of minus 32 degrees.
How does Pentair freeze protection work?
The system detects all devices that have Freeze Protection ON, and activates the device to stop the pipes from freezing. If freeze protec- tion is only applied to one body of water. Note: If the pool or spa is running a schedule or operated manually, this will override freeze protection.
How do you turn off freeze protect on Hayward?
What temp should I set my pool freeze protection?
We do recommend that you set the freeze temperature at 40-45 degrees just to be safe. During extremely harsh weather (low 20’s and windy) you might consider just leaving the pump running 24 hours per day until the weather gets back up into the upper 20’s. You have to use your best judgment on this.
How does pool freeze protection work?
Freeze Protection Units allow pool and spa owners to set a desired temperature where their pump and heater will automatically turn on. Once the climate drops to the specified temperature, the Freeze Protection Unit kicks in. It turns on your pump and heater to keep the water moving, which prevents freeze expansion.
How do I protect my pool pump in freezing weather?
You should have a freeze protection device that will automatically turn the pump on when the temperature drops to around 34 degrees. A freeze protector will keep your pool running as long as the temperature remains close to freezing.
What does interlock prevents turn on mean?
Re: What does the term “interlock” mean in reference to pool
This prevents valves from turning on that might interfere with priming (e.g. cleaner or solar valve) but it should go away in a few minutes.
How do I lock the configuration menu on Hayward pump?
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked’ (unit will beep).
Should I run my pool pump in freezing weather?
Run your pool pump continuously when temperatures are near or below freezing. You don’t need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides. Booster pumps for pool cleaners don’t need to run continuously.
Should I cover my pool pump in freezing weather?
If the power goes out and your pool system stops running:
Then just place the lid over the pump basket, but don’t lock it down. If you have a chlorinator, remove the tubbing and lid.
How do I protect my pool in freezing weather?
How to protect your pool equipment in freezing weather
- KEEP THE WATER MOVING. …
- Make sure that all your pumps are freeze protected. …
- Make sure your lines are all flowing. …
- KEEP THE WATER LEVEL UP IN YOUR POOL. …
- KEEP YOUR POOL MAINTENANCE UP TO DATE. …
- IF THE POWER GOES OUT, WINTERIZE YOUR SWIMMING POOL EQUIPMENT.
At what temperature will my pool pump freeze?
If you have an above ground pool with the pool filter system and plumbing above ground (like nearly all above ground pools), pipes and pumps can freeze up in less than an hour of minus 32 degrees.
What is freeze protection on a pool?
Freeze Protection Units allow pool and spa owners to set a desired temperature where their pump and heater will automatically turn on. Once the climate drops to the specified temperature, the Freeze Protection Unit kicks in. It turns on your pump and heater to keep the water moving, which prevents freeze expansion.