The original 011018 Drive/software is no longer being produced or supported therefore the 011018 is being replaced by the 011028 energy Star certified: Meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency & the U.S. Department of energy Energy saving to 90%* versus traditional pumps 8 …
People also ask, is a 2 speed pool pump worth it?
At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.
Keeping this in view, who makes Pentair pumps?
Sta-Rite | Brands | Pentair.
Do variable speed pumps last longer?
How does Pentair freeze protection work?
The system detects all devices that have Freeze Protection ON, and activates the device to stop the pipes from freezing. If freeze protec- tion is only applied to one body of water. Note: If the pool or spa is running a schedule or operated manually, this will override freeze protection.
What RPM should I run my Pentair pool pump?
Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.
Does a variable speed pool pump really save money?
A variable speed pool pump could save you up to 90%* on your energy costs compared to a conventional single- or two-speed pool pump. They are often quiet when running and many offer built-in programming features and better filtering capabilities.
Is Pentair better than Hayward?
Their filters are user-friendly and reliable. They clean well and overall are very well designed. If you ever have to make a decision from a price perspective, then hands down Hayward is the better choice. However, I personally prefer Pentair products because they have a nicer design and are easier to use.
How long do pool pumps last?
Are variable speed well pumps worth it?
Variable speed well pumps, booster pumps, and pool pumps are a scam. These pumps use computerized controllers, also known as Variable Frequency Drives or VFD’s, and are designed to separate people from as much of their hard earned money as possible.
How do I program a Pentair Intelliflo VSF?
Is Pentair superflo self priming?
Features: Self-priming for quicker, easier start-up. 115-volt or 230-volt models available.
How do you know when your pool pump needs to be replaced?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
Are variable speed pool pumps worth the money?
A Worthwhile Investment
Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
What is the best speed to run a pool pump?
If you are running your pool pump to filter and turn your water over, we recommend using the middle and lower speed settings. For example, for the first few days, you might run the pump at 2500 RPMs to see what your pool looks like. Next, you might dial it down to 1600 RPMs.
How much does a variable speed pool pump cost?
Where are Pentair pool pumps manufactured?
Our manufacturing plant, located in St. Paul, Minneapolis, USA, produces products for fluid processing, respiratory, membrane, blood line and systems. Our manufacturing plant located in Houston, TX, USA, produces products for industrial, pneumatic, fluid process, and hydraulic applications.
What size pump do I need for my pool?
Sizing the Pump for Your Swimming Pool
- Circular Pools: Diameter (ft.) x Diameter (ft.) x Average Depth (ft.) x 5.9 = Total pool capacity in gallons.
- Oval Pools: Length (ft.) x Width (ft.) x Average Depth (ft.) x 6.7 = Total pool capacity in gallons.
- Rectangular Pools: Length (ft.) x Width (ft.) x Average Depth (ft.)
How many years does a variable speed pool pump last?
How long should you run a variable speed pool pump?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
How do I install IntelliFlo pump?
How do you remove the impeller on a motor shaft?
Why does my IntelliFlo pump keep shutting off?
It could be a bad drive, over voltage, under voltage, drive over heating, ect. You could eliminate it being a control problem by unplugging the control cable on the motor, and manually running it. If it does not do it anymore then it is a control issue.
Is a variable speed pool pump worth it?
A Worthwhile Investment
Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
What speed should I run my Pentair variable speed pump?
Why is my pool pump leaking water?
The Pool Pump is Leaking Water
In most cases, a leak underneath a pool pump is caused by a pressure-side leak. This is easily combated by inspecting the impeller housing o-ring, shaft seal and replacing any worn, cracked o-rings or seals. Before taking apart your pool pump, we recommend purchasing a go-kit.
How long should I run my Intelliflo pump?
Do variable speed pool pumps last longer?
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
How often should a pool pump be replaced?
How long does a Pentair variable speed pump last?
Your pool pump should be replaced anywhere between 8 to 15 years depending on the quality, and a full replacement may cost over $800.
How do I replace the shaft seal on my pool pump?
Does Pentair superflo have freeze protection?
How do you free a stuck pool pump impeller?
How do you fix a leaking Pentair pool pump?
Should pool pump be on when swimming?
Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
How do I know if my pool pump impeller is bad?
What are the symptoms of a clogged impeller? If your pool pump impeller is clogged, it’s probably making some unpleasant noises (a low, grinding sound). If you look at your filter pressure, it’s likely only half of what it normally reads and the water in your pump is moving slowly or making a swirling motion.
Is a variable speed pool pump better?
With a variable speed pump a pool owner can circulate their water at lower flow rates for a more prolonged period of the day without added energy consumption. This study by the National Renewable Energy Laboratory confirms that variable speed pumps are significantly more energy efficient than single speed pumps.
How do you remove the impeller from a Pentair pump?
Why is my pool pump leaking from the bottom?
If you see water leaking out of the bottom of the pool pump assembly, it’s a good indication that you may have to replace the shaft seal within the motor pump assembly. As shown in the pool pump cut away, the shaft seal is located in the motor pump assembly behind the impeller.
How do you know when you need a new pool pump?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
How many gpm does a 1.5 HP pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
How long do Pentair pumps last?
How much does a Pentair pool pump cost?
If you want to get a high energy-efficient pool pump that has proven its high performance, you can purchase one of Pentair’s pool pumps for $600 to $1,200.
How many hours a day should you run a pool pump?
Are 2 speed pool pumps worth it?
At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.
How many hours should a variable speed pool pump run?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation.
What RPM should I run my pool at?
The filtrations system can operate at low water flow with typical motor speeds around 1000 RPM or less depending on the size of your pool and how long you want to run the pump. Suction cleaners typically run at around 2200-2400 RPM.