What is the flow rate of a 1 HP pool pump?

52 GPM

>> Click to read more <<

Accordingly, how many watts does a 1 HP pool pump draw?

Straight-up, the pool pump can be the largest energy hog on the pool equipment pad. Actual energy use depends on the horsepower of the motor, and how many hours the pump runs each day. Actual energy cost depends on your cost per kilowatt hour (kWh). Calculating Pool Pump Energy Use: Each horsepower uses 746 watts.

Correspondingly, how many gpm does a Hayward Super pump? 4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.

Pipe Size Max GPM
4″ 305

In this way, how many amps does a 1 hp inground pool pump draw?

Since it’s an aboveground pool pump it’s an uprated model and draws in the vicinity of 10 to 12 Amps at 120 volts. It might draw less depending on your plumbing.

How many amps is a Hayward 1.5 HP pool pump?

The 1.5HP pump is drawing 17 Amps on initial start up for about 2 seconds (literally), and then drops to 12 Amps and hums away.

How do I know what GPM my pool pump is?

Most pool pump specifications are expressed in gallons per minute (GPM). So, to convert from GPH to GPM, divide your GPH by 60 minutes – 2531 GPH / 60 = 42.2 GPM.

Can I replace a 1hp pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.

How many amps does a 1 HP pool pump pull?

The 1 HP Power Flo Matrix PN SPX1510Z1XE is rated for 12 amps.

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.

How many amps does a Hayward Super pump?

Answer: The Hayward SP2605X7 Super Pump . 75-HP Max-Rated Single-Speed Pool Pump is rated at 11 amps at 115 VAC (5.5 amps at 230 VAC).

What size pump do I need for my pool?

Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.

Leave a Comment