Doheny’s Above Ground Pool Pump,115 volt, ¾ hp – Max flow rate is 62 gallons per minute (gpm) and max feet of head is 30 feet. Doheny’s Above Ground Pool Pump,115 volt, 1 hp – Max flow rate is 75 gallons per minute (gpm) and max feet of head is 38 feet.
Furthermore, what size filter do I need for a 10000 gallon pool?
Filter Size
A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.
Thereof, what happens if your pool pump is too small?
If your pool filter is too small for the pump, there will be additional strain on the pump motor as it tries to push water through and encounters resistance at the filter. This will eventually burn out the pump motor and your filtration will also be compromised.
How many GPH is 3/4 HP?
Horsepower: 3/4 HP. Flow Rate: 4900 GPH (gallons per hour)
How much HP pump do I need?
Horsepower theoretically required for pumping water equals the gallons per minute multiplied by the head in feet, and divided by 4.000 For power recommended, divide by 2000 instead of 4000.
How many gpm should my pool pump?
Calculate Maximum Flow Rate
The size of your pool’s pipes determines the maximum flow rate. Count the number of intake lines for your pool and refer to the common pipe sizes below: For each 1.5-inch intake line, the maximum flow rate is 42 GPM. For each 2-inch intake line, the maximum flow rate is 73 GPM.
Does HP matter for pool pump?
Larger horsepower pumps “draw more amps” – and that’s what you really pay for on your electric bill, Amperes. If you can reduce the size of the horsepower on a replacement pump, you will definitely see savings. This can be accomplished by using a High Head pump, or a pump that produces more water volume.
How many GPH is a 3/4 HP pump?
Compatible with Different Brand or System you have before
XP75117 | XP75113 | |
---|---|---|
Horsepower | 3/4 HP | 1.5 HP |
Voltage | 115 V | 115 V |
Ampere | 3.6 A | 3.6 A / 12A |
Max Flow | 2400 GPH | 4980 GPH |
Can I replace a 1.5 HP pool pump with a 1 HP pool pump?
You cannot replace a 1.0 full rated motor with a 1.0 uprated motor. However, you can replace your 1.0 Full rated motor with a 1.5 HP uprated motor. This is because they both will have the same total horsepower.
How do I know what GPM my pool pump is?
Most pool pump specifications are expressed in gallons per minute (GPM). So, to convert from GPH to GPM, divide your GPH by 60 minutes – 2531 GPH / 60 = 42.2 GPM.
Can I replace a 3/4 HP pool pump with a 1 HP pool pump?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
What size pump do I need for my 18 foot pool?
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
What happens if you oversize a pool pump?
A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.
How many GPM is a Hayward pool pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
Pipe Size | Max GPM |
---|---|
4″ | 305 |
How many gallons per minute does a 3/4 HP well pump?
3/4 HP Submersible 3-Wire Motor 10 GPM Deep Well Potable Water Pump
Brand | Everbilt |
---|---|
Material | Stainless Steel |
Style | Submersible |
Power Source | Ac/dc |
Maximum Flow Rate | 10 Gallons Per Minute |
Can a pump be too big for a pool?
Usually, the mindset of pool owners is that a bigger pump is better. A bigger pump is not better. A pool pump can actually be too big for a pool.
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
How long do Hayward pool pumps last?
How many gpm does a 1 HP pool pump?
You can see from the chart that a 1 horsepower pump will give you 52 gallons per minute on a system with 64 feet of head. We want to give you the flow information on each pump so that you can come up with the right pump the first time.
How many gallons per minute does a 3 HP pool pump?
Pool Pump Operating Costs
Pump Size | GPM (varies with plumbing) | Cost/7 Days |
---|---|---|
1.0 HP | 60 | $10.08 |
1.5 HP | 68 | $15.12 |
2.0 HP | 76 | $20.16 |
3.0 HP | 85 | $30.24 |
What size pool pump do I need for a 30 000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How do I know if my pool pump needs replacing?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
Can a pool pump be too powerful?
The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.