According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM).
Also, how many GPH is a 3/4 HP pool pump?
Compatible with Different Brand or System you have before
XP75117 | XP75113 | |
---|---|---|
Horsepower | 3/4 HP | 1.5 HP |
Voltage | 115 V | 115 V |
Ampere | 3.6 A | 3.6 A / 12A |
Max Flow | 2400 GPH | 4980 GPH |
Accordingly, how many gallons per minute does a 1.5 HP pool pump?
For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).
How many gpm does a 3 HP pump?
Number of submersible well pump stages determine pump lift capacity
Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
---|---|---|
Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
2 HP | 14 | 4 – 42 GPM (varies by TDH) |
3 HP | 19 | 4 – 43 GPM (varies by TDH) |
5 HP | 28 | 4 – 43 GPM (varies by TDH) |
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
How do you know what size pool pump you need?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
What size pump do I need for a 15000 gallon pool?
A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.
Can I replace a 1hp pool pump with a 1.5 HP?
You cannot replace a 1.0 full rated motor with a 1.0 uprated motor. However, you can replace your 1.0 Full rated motor with a 1.5 HP uprated motor. This is because they both will have the same total horsepower.
Is a higher HP pool pump better?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Can I replace a 3/4 HP pool pump with a 1 HP pool pump?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
How many gallons per minute does a 3 HP pump?
Number of submersible well pump stages determine pump lift capacity
Table of Submersible Pump Stages vs HP vs Total Dynamic Head vs. GPM Flow Rate Capacity | ||
---|---|---|
Water Pump HP | Nr. of Pump Stages | GPM Flow Rate Capacity |
2 HP | 14 | 4 – 42 GPM (varies by TDH) |
3 HP | 19 | 4 – 43 GPM (varies by TDH) |
5 HP | 28 | 4 – 43 GPM (varies by TDH) |
How many GPM is a Hayward pool pump?
4.5 – 5.5 ft. 7 – 9 ft. 10.0 – 12.5 ft. 13.5 – 16.0 ft.
Pipe Size | Max GPM |
---|---|
4″ | 305 |
Is it better to run a pool pump at night or day?
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
How long should a Hayward pool pump last?
What is the normal pressure of a Hayward pool pump?
Generally speaking, a pressure reading between 10 – 25 psi can be considered normal. Once you have installed a new filter, turn everything on and take a baseline reading. Each time that you change your pool filter take a new baseline reading.
Is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
How can you tell if your pool pump is going bad?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.