How much salt does the system require? Salt Systems work best with approximately 3200 parts per million (ppm) of salt, which is roughly the equivalent to a teaspoon of salt per gallon. However, all Hayward Salt Systems are designed to operate with salt levels anywhere from 2700 ppm to 3400 ppm.
Keeping this in view, how do I lock the configuration menu on Hayward pump?
Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked’ (unit will beep).
Furthermore, how does a Hayward pool chlorinator work?
Your Hayward CL-220 series automatic chlorine feeder is designed for installation next to your filter system. It operates by the pressure differential of your system which draws water through the feeder. It uses slow- dissolve Trichloro-S-Triazinetrione (Tri-Chlor) large or small tablets (or sticks) ONLY.
How do you check the salt level on a Hayward?
Slide the Main Switch from “Auto” to “Super Chlorinate” and back to “Auto”. 4. Push the Diagnostic button to exit. The Instant Salinity display is the measured salt level of the pool water at that moment.
How do I program my Hayward salt?
What setting should my chlorinator be on?
Your salt levels will vary depending on the type of chlorinator you have. If you’re using the Water TechniX Salt water chlorinator then you should try to aim for a salt level of around 3,000 to 4,000 ppm.
What should my chlorinator read?
On a Hayward Salt Chlorinator, your salt reading should be between 2,700 – 3,400 PPM (parts per million) with the optimum level of 3,200 PPM.