Suction cleaners typically run at around 2200-2400 RPM. Heaters require 20 to 40 Gallons Per Minute (GPM) so might run at around half speed or a little higher. You would probably want to run your Spa at up to full speed, 3450, for maximum effect.
Also question is, is it OK to run pool pump 24 hours a day?
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Similarly, what is the benefit of a 2 speed pool pump?
Two-speed pool pumps are more energy-efficient than a single-speed pump, and work best on pools with water features. They run at two fixed speeds, high and low, and require a separate device such as an automation system to adjust between the two speeds.
Should I switch to a variable speed pool pump?
With a variable speed pump a pool owner can circulate their water at lower flow rates for a more prolonged period of the day without added energy consumption. This study by the National Renewable Energy Laboratory confirms that variable speed pumps are significantly more energy efficient than single speed pumps.
How long should I run my Pentair Intelliflo pump?
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool’s size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool’s turnover rate is.
Are 2 speed pool pumps worth it?
At River Pools, we used two speed pumps for years with great success. They are quite a bit more expensive to purchase than single speed pumps and last the same amount of time, which is typically 3-8 years. On average, a two-speed pump will save about 50%-70% on energy cost compared to a one-speed pump.
Should I run my variable speed pool pump all the time?
However, it is important to note that a variable speed pool pump should ideally be running 24 hours a day to ensure proper and optimal water circulation. When your pool pump is not running, the water is sitting stagnant in your pool allowing bacteria to survive and grow.
What RPM should I run my Pentair pool pump?
Generally, I run my equipment at 1700 RPMs for 10 hours. I run this with the saltwater generator set at 50% for 10 hours. In my case, 1700 RPM’s is the minimum I can do to reliably activate the saltwater generator and filter the pool.
How many hours should I run my pool pump in the winter?
Are variable speed pool pumps worth the extra money?
A Worthwhile Investment
Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
How long is the warranty on a pool pump?
WARRANTY CARD
| PRODUCT/PRODUCT CATEGORY | LENGTH OF WARRANTY | REQUIRES PROFESSIONAL INSTALLATION |
|---|---|---|
| Single-Phase, TEFC Super Duty Pumps | 2 Years | ✓ |
| SVRS Pumps | 2 Years | ✓ |
| SuperFlo® VS, SuperFlo® VST and SuperMax® VS Variable Speed Pumps | 2 Years | ✓ |
| IntelliFlo (#011018, #011028, #011059, #011060 and IntelliPro (#P6E6VS4H-209, #013028) | 2 Years | ✓ |
Which is better Pentair vs Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
How long do Pentair variable speed pool pumps last?
Is it better to run pool pump at night?
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Are variable speed pool pumps worth it?
A Worthwhile Investment. Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.
How long does a variable pool pump last?
Do variable speed pumps last longer?
What are the best hours to run your pool pump?
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
How long should Pentair pool pump last?
How much does it cost to install a variable speed pool pump?
The national average cost for installing a pool pump is
| Type of Pump | Costs (Materials Only) |
|---|---|
| Dual-Speed | $200 – $800 |
| Medium-Head | $300 – $800 |
| Variable-Speed | $500 – $1,200 |
How do I change the schedule on my Pentair variable speed pump?
How do you set a Pentair variable speed pump?
Is it better to run a pool pump at night or day?
It’s best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Are variable speed well pumps worth it?
Variable speed well pumps, booster pumps, and pool pumps are a scam. These pumps use computerized controllers, also known as Variable Frequency Drives or VFD’s, and are designed to separate people from as much of their hard earned money as possible.
How do I reset my Pentair Intelliflo variable speed pump?
To reset the pump to the factory default settings:
- Ensure that the pump is powered on and the green power LED is on.
- Press the Stop button to stop the pump.
- Press and hold all of the four Speed buttons simultaneously for four seconds. Power off the drive.