If you can identify an obstruction you can remove the object and then run your Dolphin again. If the Dolphin starts and continues to operate as per normal the the obstruction was the cause of the robotic pool cleaner not moving.
Also know, can you use a dolphin pool cleaner in an above ground pool?
Dolphin E10 Automatic Robotic Pool Cleaner with Easy to Clean Top Load Filter Basket, Ideal for Above Ground Swimming Pools up to 30 feet. Drop and go. Easy-to-use, light weight single button plug and play above-ground robotic pool vacuum with a 2 year quality assurance, ideal for above ground pools up to 30 feet.
One may also ask, why is my aqua Critter not moving?
If your Pool Cleaner is not moving or is barely crawling it may be clogged with debris. This guide describes how to clear the the debris and check the operation of the Main Turbine that propels the pool cleaner.
How do you test a dolphin power supply?
How do you troubleshoot a Dolphin pool cleaner?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Why does my pool cleaner get stuck?
The cleaner works by suction just like a regular vacuum cleaner, but instead of sucking in air, it sucks in water. A strainer catches all the debris and the water is recirculated. Now and then, the suction will become too strong and the cleaner will get stuck to the bottom of your swimming pool.
How long do dolphin pool cleaners last?
Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for.
How do I reset my dolphin power supply?
Check that the power supply is plugged in and turned ON. Check that the power cable is securely connected all the way into the power supply. Turn the power supply OFF. Wait 30 seconds, then turn it back on.
How do you test a dolphin pool cleaner?
How long does the Dolphin pool cleaner run?
The Maytronics Dolphin Nautilus Robotic Cleaner is self-contained and fully automatic. Just drop it in your pool, turn it on and leave it for about 3 hours.
Why is my Dolphin pool cleaner not climbing walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
How long is Maytronics warranty?
The Best Warranty in the Industry
Maytronics warrants that your Premier Dolphin pool cleaner will be free from defects in material and workmanship for 3 years. To prove how serious we are about delivering the best-in-class high performance robot, the Dolphin Premier is backed by the very best warranty in the industry.
Why is my pool cleaner not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
How long does the Dolphin e10 pool cleaner run?
Why is my automatic pool vacuum not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Why does the creepy stop working?
The most common cause for a Kreepy to stop working is clogged filter sand. This is easy to diagnose because whenever you backwash the pool filter, you’ll find that the Kreepy works like a bomb for 10 minutes. Then it gets sluggish and slows down or stops again.
How do I turn on my Maytronics pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
How do you test a Maytronics power supply?
Testing the power supply
- Connect the tester to the power supply.
- Switch the power supply on.
- If the tester light is on, proceed to test the cable.
- If the tester light is off, check the power socket and AC cable. If they are working, then replace the power supply and proceed to test the cable.
How do I connect my dolphin pool cleaner to Bluetooth?
Make sure Bluetooth® is active on your smartphone and download and activate the MyDolphin™ app. Once downloaded, the app searches for and displays the serial number of the nearest Dolphin robot. Click on the Dolphin serial number displayed on your screen. Register by entering your email address and creating a password.
Why is the pool cleaner not working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
Why does my pool vacuum stay in one place?
The stronger the water flow, the more likely it is to get stuck in one place. You need some suction though or the pool won’t get cleaned properly. The easiest solution is a flow keeper valve. A flowkeeper valve is a valve that regulates the flow of water through the hose going to the cleaner.
How do I make my pool vacuum work?
Why is my pool cleaner not moving?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
Why is my robotic pool cleaner not moving?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
How do I troubleshoot Maytronics dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Why is my pool robot not working?
If your robotic pool cleaner stops moving, check the power cord. It may not be plugged in properly or there may be a problem with the power supply. Check the power supply to make sure the indicator light is on. If it is and the pool cleaner is still not moving, then the problem lies with the cleaner.
Can I use an extension cord with my Dolphin Pool Cleaner?
Dolphin Nautilus Automatic Robotic Pool Cleaner with Dual Filter Cartridges, Two Scrubbing Brushes… Dolphin does not recommend an extension cord.
Why won’t my dolphin pool cleaner climb walls?
My Dolphin Won’t Climb Walls / Gets Stuck
Clean filters: The Dolphin’s filters may be clogged and need to be cleaned. Make sure you clean these filters after each use. Do not allow filters to dry out before cleaning. Deeper cleaning of the filters is also highly encouraged and may be required occasionally.
Why can’t you use an extension cord with a dolphin pool cleaner?
Do not use an extension cord. In a wet deck environment the risk of stray voltage while small is signicant.
How often should I run my Dolphin Pool Cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
What to do when pool vacuum stops working?
First, if you find your pool cleaner not moving, check the cleaner’s hose to make certain it is strongly affixed to the suction-line in the skimmer. Additionally, if you find your pool vacuum not moving, check the hose segments to make certain there are no air-leaks where the hose sections meet together.
How do I fix my Dolphin pool cleaner?
Can Dolphin Power Supply get wet?
The power supply is water resistant but not waterproof. Please cover the power supply if inclement weather approaches. Do not leave the power supply in standing water as this will damage the internal components.
How often should you run Dolphin?
If you have a lot of swimming in your pool, you can use the robotic pool cleaner every other day or once a day. If you don’t swim a lot, you should only run the pool once every two weeks.
Can I leave my dolphin pool cleaner in the pool overnight?
While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
How long do Dolphin robotic pool cleaners last?
Generally, you can expect at least 5 years‘ service from your quality robotic pool cleaner. The more expensive units are generally better quality – you do get what you pay for.
How do I connect my dolphin pool cleaner?
Make sure Bluetooth® is active on your smartphone and download and activate the MyDolphin™ app. Once downloaded, the app searches for and displays the serial number of the nearest Dolphin robot. Click on the Dolphin serial number displayed on your screen. Register by entering your email address and creating a password.
How long is a cycle for a Maytronics dolphin?
Product Specifications
| S 300 | |
| Ideal pool length | Up to 12 m |
| Cleaning coverage | Floor, Walls & Waterline |
| Brushing | Brush + Active Scrubber |
| Cleaning cycle time | 1 or 2 hours |
Where is the impeller on my dolphin pool cleaner?
How do you troubleshoot a Maytronics Dolphin?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off. …
- Unplug the power supply.
Can I leave my Dolphin pool cleaner in the pool?
This will help protect the Dolphin from surges in power such as thunderstorms. Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.
How long do you backwash a pool?
Open the air bleeder assembly on your filter and turn pump on. Watch the pressure gauge for spikes. After the hose fills with water, backwash your sand filter for 2 – 3 minutes, or until water runs clear.
Can you leave pool vacuum in pool overnight?
Cleaners aren’t meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
Does the dolphin pool cleaner work on above ground pools?
The Dolphin E10 robotic pool vacuum cleaner was designed specifically for above-ground swimming pools, making it the perfect solution for pools up to 30 feet. Backed by a 2-year quality assurance, get a worry free clean.
Why is my zodiac pool cleaner not working?
Check the suction flow using your pool pulse. Check the AD valve. Check the pool cleaner hose for any air leaks and. Check the diaphragm in your Zodiac pool cleaner.
Why does my pool cleaner stopped working?
When a suction cleaner is sluggish or slow, it’s usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.