Why is my pool pump running but not pumping water?

by

Why is my pool pump running but not pumping water? The pool pump runs but has low water flow. It could be something blocking it, a dirty pool filter, or too much air in the system. If there’s something blocking your pump’s suction, check your filter gauge. If it’s 10psi above the normal reading, clean your filter. This will reduce pressure and reset your pump’s flow.

Can you use a robotic pool cleaner on a vinyl pool?

by

Can you use a robotic pool cleaner on a vinyl pool? Although most robotic cleaners will state that they work on any pool surface, there are some robotic cleaners that I would not recommend with a vinyl liner. Aquabot cleaners, the traditional type, have a small risk of damaging a vinyl liner when parts wear out.

What PSI should a pool pump run at?

by

What PSI should a pool pump run at? Normal pressure for most pools is between 10 and 25 PSI (70-170 kPa). The pressure for filtration systems varies depending on the type of filter, the size of the lines, the pump and other pool equipment.

Can you use a robotic pool cleaner in an above ground pool?

by

Can you use a robotic pool cleaner in an above ground pool? Robotic pool vacuums take the maintenance tasks off your hands. These vacuums will clean the entire bottom of an above ground pool completely on their own, making them a great option for people who enjoy the set-it-and-forget-it lifestyle.

Are single-speed pool pumps being discontinued?

by

Are single-speed pool pumps being discontinued? After the July 19 cut-off date, manufacturers will no longer be able to produce pumps that don’t meet the efficiency requirements. That doesn’t mean retailers can’t sell them. However, leftover inventory of non-compliant single speed pumps is expected to deplete quickly.

What is a 1081 motor?

by

What is a 1081 motor? Centurion “1081” Series Energy Efficient Motor. No-adjust start switch that is rated for over one million cycles for motor longevity. Unique electrical design with a unique, advanced cooling system that helps extend the life of the motor. Heavy duty shaft made from 303 grade stainless steel helps prevent corrosion.

What chemicals are needed to maintain an above ground pool?

by

What chemicals are needed to maintain an above ground pool? Things you’ll be testing for include chlorine, PH, total alkalinity, Cyanuric acid (stabilizer), and calcium hardness. The levels need to be properly balanced for safe and clean water before swimming in it. The free chlorine level should be between 2.0 and 4.0 ppm. The PH level should be between 7.2 and 7.8.