How often should I put Clorox in my pool?

by

How often should I put Clorox in my pool? Chlorine has a low pH level, and in order to maintain your pool water’s clarity and balance, shocking weekly will allow you to quickly raise the chlorine level, which will rid the pool of contaminants, without lowering the water’s pH levels.

What is the difference between AquaNaut 400 and 450?

by

What is the difference between AquaNaut 400 and 450? Applications. AquaNaut 400 is well suited for larger pools up to 20′ x 40′ or pools with deep ends. AquaNaut 450 cleans pools up to 20′ x 40′. In order for AquaNaut 450 to effectively clean a pool larger than 16′ x 32′ pool, it must be retrofitted by a pool professional with a larger cam (sold separately).

What do I need to maintain my above ground pool?

by

What do I need to maintain my above ground pool? Here are 10 key tips for above ground pool maintenance.Install a Sump Pump in Your House.Test the Chlorine Level.Do Weekly Shock Treatments.Test the pH Level.Run the Pool’s Pump at Least Eight Hours a Day.Regularly Clean and Replace the Filter.Regularly Clean Out the Pump and Skimmer Baskets.Vacuum Often.

What is a centrifugal switch on pool pump?

by

What is a centrifugal switch on pool pump? The centrifugal switch puts the start winding and start capacitor in the circuit to give it the extra torque the motor needs to start, then removes them from the circuit when the motor is up to speed.

What does pool maintenance include?

by

What does pool maintenance include? Pool pump/motor. Filter pressure. Pool Cleaner.Making sure your pool//spa is spotless from top to bottom.Skim pools surface, netting leaves and debris.Brush pools steps, seats and walls as needed.Leaf and debris removal.Vacuum for small debris as needed.Inspect Equipment for proper operation.

How do you vacuum to waste with a Hayward cartridge filter?

by

How do you vacuum to waste with a Hayward cartridge filter? HOW TO VACUUM TO WASTE A POOL:Fill the pool before beginning, and run the hose while vacuuming.Shut off pump and switch the multiport valve to the Drain to Waste Position.Vacuum as fast as possible, the water level can drop fast.Stop vacuuming when the skimmer begins to suck air, allow the pool to refill.

What chemicals do you need for a Coleman above ground pool?

by

What chemicals do you need for a Coleman above ground pool? The free chlorine level should be between 2.0 and 4.0 ppm. The PH level should be between 7.2 and 7.8. The total alkalinity should be between 80 and 120 ppm. The calcium hardness should be between 200 and 400 ppm and the Cyanuric acid (stabilizer) should be between 30 and 50 ppm.