How do you maintain a pool spa?

by

How do you maintain a pool spa? Tips for keeping your spa or pool healthyKeep the water clean and clear. … Clean the skimmer and pump baskets regularly.Ensure the water is properly treated, and contains the correct levels of chemicals.Always follow the instructions on pool chlorine containers in relation to safe handling and disposal of the product.

How much is a Dolphin active 30?

by

How much is a Dolphin active 30? 2022 CleanersItem Number2022 PriceDolphin EncoreBasic$699.99Dolphin Active 15Preformance$799.99Dolphin Active 20Advanced$999.99Dolphin Active 30Deluxe WiFi$1299.99

What chemicals are needed to maintain pool?

by

What chemicals are needed to maintain pool? Generally speaking, these are the swimming pool chemicals you’ll need to know about to keep your pool water balanced.Chlorine. Chlorine is the most common chemical used to sanitize a pool. … Bromine. … Oxidizers. … Cyanuric Acid. … pH Increaser/Decreaser. … Alkalinity Adjusters.

Why is my pool pump not building pressure?

by

Why is my pool pump not building pressure? It could be a clogged pump basket, impeller, pipe, or skimmer basket. It could also be a closed or broken valve before the pump. In some cases, the pump may have an air leak and is drawing in more air than water. This can reduce filter pressure (and filtration ability).

Are automatic pool cleaners worth it?

by

Are automatic pool cleaners worth it? Bottom Line: Yes! Robotic pool cleaners are 100% worth the investment. It’ll be the best money you ever spent on your swimming pool. Any automatic swimming pool cleaner should be able to clean your pool within about three hours, depending on your pool’s size.

Can you leave a Dolphin pool cleaner in the pool?

by

Can you leave a Dolphin pool cleaner in the pool? Can you leave the Dolphin in the water? It is safe to leave your Dolphin cleaner in the water when not in use. However, (when adding chemicals to the pool) please remove the Dolphin until the proper chlorine and PH balance are obtained.

What RPM should I run my Hayward variable speed pump?

by

What RPM should I run my Hayward variable speed pump? Generally, I run my equipment at 1700 RPMs for 10 hours. I run this with the saltwater generator set at 50% for 10 hours. In my case, 1700 RPM’s is the minimum I can do to reliably activate the saltwater generator and filter the pool.

Why is my pool pump running but not pumping water?

by

Why is my pool pump running but not pumping water? The pool pump runs but has low water flow. It could be something blocking it, a dirty pool filter, or too much air in the system. If there’s something blocking your pump’s suction, check your filter gauge. If it’s 10psi above the normal reading, clean your filter. This will reduce pressure and reset your pump’s flow.