Is variable speed pool pump worth it?

by

Is variable speed pool pump worth it? A Worthwhile Investment Even at a higher initial cost than single-speed pumps, the best variable speed pumps are the superior investment because they offer prolonged filtration, more water turnover, and lengthier sanitation durations. These benefits make it easier to maintain your pool.

What chemicals do you need for salt water pool?

by

What chemicals do you need for salt water pool? Salt water pools are most stable with a pH of 7.6, and Alkalinity of 70-80 ppm. A stabilizer level of 50-80 ppm is recommended by most salt system manufacturers. High calcium hardness levels have no effect on salt water pools, but a level of 180-200 ppm may result in less scale on the salt cell plates.

What chemicals should I put in my Intex pool?

by

What chemicals should I put in my Intex pool? Intex Pool Chemical Startup ListAlkalinity increaser (sodium bicarbonate)Alkalinity decreaser (sodium bisulfate)pH increaser (sodium carbonate)pH decreaser (sodium bisulfate)Calcium hardness increaser (calcium chloride)Sanitizer (liquid chlorine, chlorine tablets, Intex saltwater pool system)

How do I adjust my Hayward pool heater?

by

How do I adjust my Hayward pool heater? The temperature can be displayed in Fahrenheit or Celsius. TO change the display, use the “MODE” button to place the heater in “STANDBY”. Then press and hold the “UP” and “MODE” buttons until the display shows the °F/°C selection. Press the “DOWN” button to toggle between selections.

Is it cheaper to wash car at home or car wash?

by

Is it cheaper to wash car at home or car wash? Home wash is cheaper than the car wash. It costs you nothing, but the initial purchasing of the supplies but demands more time and labor. Washing your vehicle from your home requires only your leisure time, patience, physical endurance and some tools. On the other hand, professional car wash costs you a few dollars.

What is the difference between 1 HP and 1.5 HP pool pump?

by

What is the difference between 1 HP and 1.5 HP pool pump? As I mentioned before, the 1.5 HP PowerFlo LX has only 1 GPM more flow rate than the 1 HP PowerFlo LX so very little difference between the two pumps. However, for an 18″ filter, you don’t want to exceed more than about 35 GPM.

What does alarm overcurrent mean on a pool pump?

by

What does alarm overcurrent mean on a pool pump? Over current: Indicated that the drive is overloaded or the motor has an electrical problem. The drive will restart 20 seconds after the over current condition clears.

Can you lubricate a pool pump motor?

by

Can you lubricate a pool pump motor? Properly maintaining your pool pump’s motor extends the life of your pool pump. Certain parts of the motor, such as O-rings and bearings, benefit from periodic lubrication with a water-based lubricant.

Is a 1.5 HP pool pump good?

by

Is a 1.5 HP pool pump good? With that in mind, a 0.5-horsepower pump with 40 feet of head resistance is suitable for small pools up to 11,000 gallons. A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons.