How do you clean a coral stone deck? Natural or mildly alkaline cleansers should be used when cleaning coral stone. If unsealed, steam cleaning is recommended every three months to kill microorganisms colonized within the stone. Spills should be cleaned immediately by blotting with a paper towel. Avoid wiping the area to prevent spreading the spill.
How do you install a solar pool controller?
What is a pool log? A pool log is a tool used by certified pool operators or pool managers to record findings and actions performed during regular pool maintenance checks.
What causes pool pump capacitor failure? If the motor runs lightly-loaded, also known as hot, it can cause high capacitor voltage, ultimately leading to failure. Light-loading or running hot can occur due to restrictions, such as an air leak. The capacitor is faulty from the start, either it is from a bad batch or mishandled before it installed.
How do I charge my Aiper smart pool cleaner?
Why is my pool pump running high pressure? High pressure usually indicates a dirty pool filter, time to backwash or pull out the filter cartridge for cleaning. Be careful with high filter pressure, as filter tanks can rupture with deadly force.
Which way does water flow through a pool pump?
What should the PSI be on a Hayward pool pump? Generally speaking, a pressure reading between 10 – 25 psi can be considered normal. Once you have installed a new filter, turn everything on and take a baseline reading. Each time that you change your pool filter take a new baseline reading.
Can you control the temperature of a pool? Heat pumps have a built-in thermostat most units come with dual digital controlled thermostats that can handle both your pool and your spa. Once the desired temperature is reached, the thermostat will shut the unit off or turn it back on if the water temperature drops by more than two degrees.
How do I vacuum my Hayward pool pump? With pump and filter system operating, fill vacuum hose with water. Keeping water in hose, place hose end over SKIM-VAC hose connection. Insert SKIM-VAC into skimmer and firmly place over basket. Hold SKIM-VAC in place until all air is evacuated from vacuum hose.