Can I replace a 1.5 HP pool pump with a 2.0 HP?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

>> Click to read more <<

Correspondingly, how deep can a 2 HP well pump go?

A 70 meter deep (230 ft deep) well can be served by a 2 hp. submersible pump delivering about 30 gpm but at close to zero discharge pressure! To get to a 20 psi discharge pressure a typical submersible in the 3 hp. range can deliver 35 gpm, and at 40 psi discharge pressure, the same pump will deliver about 30 gpm.

Similarly, how much does a Hayward pool pump cost?

$500 to $1,200

Subsequently, is Pentair and Sta rite the same company?

STA-RITE. The Sta-Rite brand exists since 1934 and is sold in over 100 countries worldwide. In Europe, Pentair already produces a wide range of Sta-Rite swimming pool pumps and cleaners for its pool division, which have gained a reputation for quality and durability.

How much HP pump do I need?

Horsepower theoretically required for pumping water equals the gallons per minute multiplied by the head in feet, and divided by 4.000 For power recommended, divide by 2000 instead of 4000.

Can my pool pump be too powerful?

The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.

How long should a Pentair booster pump last?

My pool supply company said that most pumps would only last 3 to 4 years.

Can I replace my pool pump myself?

A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.

Is it OK to run pool pump 24 hours a day?

The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.

What size pump do I need for my pool?

Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.

How long do Pentair pumps last?

Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years. Modern pumps are made of hard plastic and will over time warp.

Where are Pentair pumps made?

Our manufacturing plant located in Houston, TX, USA, produces products for industrial, pneumatic, fluid process, and hydraulic applications. Some of our plant capabilities and features include: Design consultation and rapid prototyping services with 3D printing capability.

How can you tell if your pool pump is going bad?

Signs You Need Pool Pump Replacement

  • Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
  • Grinding or Screeching Sounds. …
  • Blowing Bubbles and Spitting Water. …
  • Old Age. …
  • Get a New Pool Pump Now to Keep Enjoying Safe Water.

How do you know if your pool pump motor is bad?

Don’t Wait to Call for Swimming Pool Pump Replacement

  1. Age. Yes, the age of your pump is an early trouble sign. …
  2. Noise. Your pool pump should run quietly. …
  3. Power Trip. Has your pool pump motor started to trip your electric breaker box more and more frequently? …
  4. Swimming Pool Pump Motor Keeps Shutting Off. …
  5. Loss of Suction.

Is Pentair better than Hayward?

When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

How long do Pentair pool pumps last?

between 8 to 15 years

How many HP is a GPM?

Tips. The typical efficiency of most hydraulic equipment runs at about 60 percent to 75 percent. One horsepower equals 3,960 gallons/minute/feet.

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.

Where are Pentair pool pumps manufactured?

Our manufacturing plant, located in St. Paul, Minneapolis, USA, produces products for fluid processing, respiratory, membrane, blood line and systems.

How many years does a variable speed pool pump last?

On average, pool pumps last eight to 12 years before needing replacement. Over time, it’s normal for pool parts to begin to wear down. In addition, swimming pool technology has come a long way in the last decade.

Are Pentair and Hayward the same?

Hayward may have a smaller footprint than Pentair in the marketing and advertising world, but they make great products. Their filters are user-friendly and reliable. They clean well and overall are very well designed.

Do variable speed pumps last longer?

How do you know when a pool pump is going bad?

Signs You Need Pool Pump Replacement

  1. Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
  2. Grinding or Screeching Sounds. …
  3. Blowing Bubbles and Spitting Water. …
  4. Old Age. …
  5. Get a New Pool Pump Now to Keep Enjoying Safe Water.

How many gpm does a 2 HP pool pump?

The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.

How many gallons per minute does a 2 HP pool pump?

73 gallons per minute

How many gpm does a 2.5 HP pool pump?

148 GPM

Is more HP better for pool pump?

Larger horsepower pumps “draw more amps” – and that’s what you really pay for on your electric bill, Amperes. If you can reduce the size of the horsepower on a replacement pump, you will definitely see savings. This can be accomplished by using a High Head pump, or a pump that produces more water volume.

Should pool pump be on when swimming?

Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.

Is Hayward a good pool pump?

Hayward SP2610X15 1.5 HP Inground Pool Pump — Best Overall

It is recognized across the industry as one of the best inground pool pumps due to its reliability and performance. On top of this, it is extremely efficient thanks to its balanced Noryl impeller.

How many gallons does a 2 inch pump per minute?

Champion’s 2-inch Semi-Trash Water Transfer Pump includes everything you need except oil and gas to start pumping. Pump 158 gallons of water per minute, powered by the 196cc Champion engine.

How often should a pool pump be serviced?

We recommend seeking a yearly checkup by a professional, just to make sure everything is in order, and running as it should be. The best time to do this is in spring, right before peak use, so you can guarantee friends and family a safe swim.

Can a pool pump be too big?

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

How many horsepower do I need for my pool pump?

According to the chart for 50 Feet of Head (closest to 47′), we need a pump between 3/4 HP (31 GPM) and 1 HP (50 GPM). Since we always go for the higher GPM, we would select the 1 HP pump.

What is the difference between a Hayward Super pump and Super pump 2?

How many gallons per minute does a 1.5 HP pool pump?

For each 1.5 inch intake line, the maximum flow into the pump will be 42 gallons per minute (GPM).

Can I replace my 1hp pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.

What is the flow rate of a 2 horsepower pool pump?

The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.

How long does a Hayward pool pump last?

Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years.

Leave a Comment