Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
Similarly, can I replace my 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
| Pipe Size | Max GPM |
|---|---|
| 4″ | 305 |
Just so, what size pool pump do I need for a 30 000-gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How many GPH is my pool pump?
To come up with this flow rate, simply divide your calculated gallons by eight. For the Rectangular pool example, the GPH required is 20,250 gallons / 8 hours or 2531 GPH. Most pool pump specifications are expressed in gallons per minute (GPM).
How do I know what GPM my pool pump is?
Most pool pump specifications are expressed in gallons per minute (GPM). So, to convert from GPH to GPM, divide your GPH by 60 minutes – 2531 GPH / 60 = 42.2 GPM.
What size filter do I need for a 10000 gallon pool?
Filter Size
A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.
Can a pool pump be too big?
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
How many gallons per minute does a 3/4 HP pump?
Horsepower: 3/4. Flow: 10 GPM @ 100′ with 50 PSI discharge pressure.
Can a pump be too big for a pool?
Sizing the Pump for Your Swimming Pool
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
How many gpm does a 2 HP pool pump?
The maximum flow into the pump will be 73 gallons per minute for each intake line. The maximum flow into the pump is 42 gallons per minute for each 1.5 inch intake line.
How much electricity does a 1.5 hp motor use?
Answer: How much electricity is consumed by a 1.5 HP motor if it is working for 20 minutes per day depends on the load. 1.5 hp = 1 kw =0.3 kwh for 20 minutes per day. Thus the energy required per day is = 1.119/3 = 0.373 kWh.
What is the flow rate of a 1 HP pool pump?
What is the flow rate of 1.5 HP pump?
1.5 hp horizontal centrifugal pump has maximum flow 4.9m3/h (21.6 gpm), maximum head 29m (95ft) and same diameter of inlet and outlet 25mm (1 inch).
How many GPH does a 1.5 HP pool pump?
Compare Similar Pool Pumps
| current product | Best Seller |
|---|---|
| 1.5 HP 8350 GPH 3450 RPM Powerful Above Ground Swimming Pool Pump with Strainer Basket | 1½ HP PowerFlo LX 115-Volt 1½ in. Plumbing, 6 ft. Standard Power Cord Aboveground Pool Pump Single Phase |
| $23999 | $32979 |
| (1) | (23) |
| Inlet Connection Threaded female | Threaded female |
How much electricity does a 1.5 HP pool pump use per hour?
Calculating Pool Pump Energy Use: Each horsepower uses 746 watts. For a 1.5 hp pool pump, multiply 746 watts by 1.5 hp, for a total of 1,119 watts. Most utilities charge from 10¢ to 15¢ per kilowatt-hour, and to know kilowatt-hours, multiply watts X hours and divide by 1,000.
Do pool pumps use a lot of electricity?
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
How many GPH is a 1.5 HP pool pump?
What is the flow rate of a Hayward Super pump?
Hayward Super Pump 1.5HP (1.1kw) Single Phase Pump – SP1616XE221 Flow Rate 16m3 hour. For more than 40 years, the Super Pump has been the benchmark for swimming pool pumps. Versatile, efficient and reliable, it satisfies all the demands you can make on a Hayward Pump.
What is the flow rate of a 1.5 HP pool pump?
How much power does a 1.5 HP water pump use?
so, 1.5 hp motor would consume 1100 watts, inductive load, on the electric system.