How much does it cost to replace a Hayward pool pump motor?

Pool Pump Motor Replacement Cost

Including labor and materials, replacing the pool pump motor costs between $250 and $650.

>> Click to read more <<

Subsequently, when should I replace my pool pump motor?

On average, pool pumps last eight to 12 years before needing replacement.

One may also ask, what causes a pool pump to burn out? A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.

In this regard, is it worth fixing a pool pump?

When determining the magic number of replacement parts cost versus the cost of the whole pump, we generally suggest 60-75% as the standard. If the cost to repair is within or over this range, it is smarter to replace the pump. This way you have a brand new pump and warranty covering any mishaps down the line.

Can I replace my 1 HP pool pump with a 1.5 HP?

So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.

Can my pool pump be too powerful?

Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.

How do you know if your pool pump motor is bad?

Don’t Wait to Call for Swimming Pool Pump Replacement

  1. Age. Yes, the age of your pump is an early trouble sign. …
  2. Noise. Your pool pump should run quietly. …
  3. Power Trip. Has your pool pump motor started to trip your electric breaker box more and more frequently? …
  4. Swimming Pool Pump Motor Keeps Shutting Off. …
  5. Loss of Suction.

How long does a pool pump motor last?

Most pool pump motors last at least 6-8 years, often longer. But that’s if you’re referring to magnetic drive pool motors, which are used in newer variable speed pumps.

How do I know what model Hayward pool pump I have?

To identify their motor you will need to locate the “Part #” on the label. The format for this is a nine digit number in the pattern of ‘X-XXXXXX-XX’. Search this model number by removing the first and last two digit sets leaving the middle six.

How do I tell what year my Hayward pool pump is?

The product ID tag and serial number

  1. 402 = 2004, Feb.
  2. 405 = 2004, May.
  3. 501 = 2005, Jan.
  4. 502 = 2005, Feb.

How do you lubricate a Hayward pool pump?

What size pump do I need for a 15000 gallon pool?

A 15,000-gallon pool needs about 20 GPM output if we want to run it 24 hours per day. Most people run their pool on an 8-hour on/16-hour off (stagnant) cycle.

How do I tell how old my Hayward pool pump is?

The 5th and 6th digits of the serial number of a Hayward heat pump pool heater are the year of manufacture, and the next two are the month. So the example shown below was produced in August, 2017. This serial number system has been in effect since May, 2010.

Is Hayward a good pool pump?

Hayward SP2610X15 1.5 HP Inground Pool Pump — Best Overall

It is recognized across the industry as one of the best inground pool pumps due to its reliability and performance. On top of this, it is extremely efficient thanks to its balanced Noryl impeller.

How do you fix a noisy pool pump motor?

Many pump noises can be fixed in just a few steps.

  1. pool pump (right) and equipment.
  2. Anti Vibration Rubber Pad.
  3. Anti Vibration Feet Pads.
  4. Anti Vibration Adhesive Rubber Pads.
  5. pool skimmer.
  6. pool filter pump.
  7. Cleaning out your skimmer basket regularly can reduce pool pump noise.

How long do Hayward pool Motors last?

Old Age. Well-maintained high-quality pool pumps can last between eight to 12 years. If you’ve missed out on many critical pool services, however, you can expect your pump to fail sooner. If your pump is more than half a decade old and it’s becoming more and more problematic, it’s best to get a new one.

What is the normal pressure of a Hayward pool pump?

Generally speaking, a pressure reading between 10 – 25 psi can be considered normal. Once you have installed a new filter, turn everything on and take a baseline reading. Each time that you change your pool filter take a new baseline reading.

How long is a Hayward pool pump warranty?

three years

Where do I find the model number on my pool filter?

Every pool filter comes with a spec and model information sticker on its tank. This sticker lists the make and model, the list of sizes for that particular model, and their specs. The model number of your specific unit should be marked. The label should also list a serial number.

Can I replace my pool pump myself?

A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.

Can I replace a 1.5 HP pool pump with a 1hp?

Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.

How much does a pool motor cost?

On average, pool pump replacement costs about $440, average prices ranged from $80 to $800 for pool pump replacement in the US in 2020.

How do I lubricate my pool pump motor?

Pull the motor armature out of the housing. Rub a generous amount of water-based engine lubricant on your fingers. Rub your fingers over each bearing, lubricating it well.

Which is better Pentair or Hayward?

When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.

How long does a Hayward pool pump last?

Your pool’s pump is the wet end of the operation, it houses the pump basket. Pumps should last through the initially installed motor and perhaps as many as two or three replacement motors, usually 10-12 years.

What is the difference between a pool pump and a pool motor?

The pump’s shaft spins up to 3,450 revolutions per minute to turn the impeller to draw water from your pool and then push it through your filter and back to the pool. The motor is a cylindrical steel enclosure, usually black but sometimes gold or almond-colored, bolted to the back end of the wet end.

How do you maintain a Hayward pump?

What brand pool pump is the best?

  • BEST OVERALL: Hayward W3SP2610X15 Super Pump Pool Pump.
  • BEST BUDGET: Pool Pump by Blue Torrent, 1 HP Maxiforce In Ground.
  • BEST SINGLE SPEED: Hayward W3SP2307X10 MaxFlo XL Pool Pump.
  • BEST DUAL SPEED: XtremepowerUS 2HP In-Ground Pool Pump.
  • BEST VARIABLE SPEED: Hayward W3SP2303VSP MaxFlo Variable-Speed Pool Pump.

Can I replace a 1.5 HP pool pump with a 2.0 HP?

Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.

How do I identify my Hayward sand filter?

Sand filters are usually measured around the circumference, cartridge filters are usually measured by height or element size. +1 ! And, go to the Hayward website and see if there’s one that it looks like.

Can you oversize a pool pump?

The only real problem with an oversized pump is that it uses more electricity than a smaller pump would to do the same job. Unless you have a spa or waterfall or some other water feature, a 2 HP pump is larger than what you really need and costs more to run than a smaller pump would cost.

Can a pool pump motor be repaired?

If you’re fairly confident in your DIY skills then you can always do minor pump repairs like changing the mechanical seals or changing your pump bearings.

Can a pool pump be too big?

You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.

How much does a 1.5 HP pool pump cost?

$1.36 per day x 365 days = $496 per year to Operate a 1-½ HP Variable Speed Pump. Cost to Operate 1-½ HP Single Speed Pool Pump $1,062 / yr Vs. Cost of Variable Speed Pump $496 / year.

Where is the model number on a Hayward Navigator?

Hayward model numbers are found on the data plate or data label on the machine. This is usually located on the back or bottom of the unit.

How much does it cost to rebuild a pool motor?

A replacement motor is generally going to cost you in the neighborhood of $150 – $300 depending on the horsepower. Add another $15 – $30 for the absolutely necessary, non-negotiable new shaft seal.

What is the difference between 1hp and 1.5 hp motor?

So, on low speed the 1 HP moves 43 GPM and the 1.5 HP moves 45.5 GPM. To save money you want to hopefully run it on low speed (much less electrical current is used on low speed and it’s more quiet).

Leave a Comment