A 1-horsepower pump with the same resistance will work for pools up to 26,000 gallons, while a 1.5-horsepower pump is suitable for large pools up to 30,000 gallons. A massive 2-horsepower pump can clean pools up to 46,000 gallons.
Likewise, people ask, how many gallons per hour does a 1.5 HP pool pump?
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
This product by Hayward is a 1.5hp pool pump designed to pump up to 90 GPM in most pools. It requires less maintenance and is highly efficient.
Just so, can a pump be too big for a pool?
Sizing the Pump for Your Swimming Pool
You might think bigger is better in terms of pump size, but a pump that is too big can cause serious problems. In the example above, the pool’s average depth is 8 feet. Now use the formulas below to determine the volume of water in your pool.
Can I replace a 1.5 HP pool pump with a 1hp?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
Can I replace my 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
Is Pentair pool pump better than Hayward?
When it comes down to it, both pumps have their own strengths and weaknesses. The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
How do you size an inground pool pump?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
What is the difference between 1 HP and 1.5 HP pool pump?
As I mentioned before, the 1.5 HP PowerFlo LX has only 1 GPM more flow rate than the 1 HP PowerFlo LX so very little difference between the two pumps. However, for an 18″ filter, you don’t want to exceed more than about 35 GPM.
How do you know if your pool pump is going out?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
What is the flow rate of 1.5 HP pump?
1.5 hp horizontal centrifugal pump has maximum flow 4.9m3/h (21.6 gpm), maximum head 29m (95ft) and same diameter of inlet and outlet 25mm (1 inch).
What size pool pump do I need for a 30 000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
What happens if your pool pump is too small?
If your pool filter is too small for the pump, there will be additional strain on the pump motor as it tries to push water through and encounters resistance at the filter. This will eventually burn out the pump motor and your filtration will also be compromised.
What size pump do I need for a 30 000 gallon pool?
Pool gallonage x 2 (the recommended number of cycles in a day) ÷ daily hourly run time ÷ 60 (minutes in an hour). So, for a 30,000-gallon pool that runs continuously (24-hours), the formula is: 30,000 x 2 ÷ 24 ÷ 60 = 41.6 or rounded up it’s a 42 GPM minimum flow rate.
How long do Pentair pool pumps last?
Can I replace a 1 HP pool pump with a 1.5 HP?
So to answer the question, yes, you can replace your 1hp pool pump with a 1.5hp pool pump, but only if your situation calls for it. If you’ve determined that your current pump is too small for your pool, then we’ll suggest replacing it with a larger ECO pump like the Water TechniX Pump Alpha ECO.
Can I replace a 1.5 HP pool pump with a 2hp pump?
Pool owners often mistakenly believe if they choose a 2 HP pump over a 1 HP pump, they are getting double the performance. This is simply not true. In this scenario, you will get only about 15% more flow from the 2 HP model. But the amp draw of the larger pump will be significantly higher, raising your electric bill.
Does a pool pump use a lot of electricity?
Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.
How many gallons per minute does a 1.5 HP pool pump?
Pool Pump Operating Costs
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
| 3.0 HP | 85 | $0.18 |
What size pump do I need for my 18 foot pool?
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
Can a Hayward pool pump overheat?
A pool pump can overheat in two ways: because of an electrical problem or friction. While electrically related failures are by far the most common cause for pump overheating, as we will discuss at length, there is also the potential for a friction fire to develop if a pump is starved for water.
How many liters per minute does a 1.5 HP pump pumps?
1.5 hp Single Phase V4 Submersible Pump, Maximum Discharge Flow: 100-500 LPM.
How do I know if my pool pump needs replacing?
Signs You Need Pool Pump Replacement
- Rumbling Sounds. An excessively-vibrating pump motor can create these rumbling sounds. …
- Grinding or Screeching Sounds. …
- Blowing Bubbles and Spitting Water. …
- Old Age. …
- Get a New Pool Pump Now to Keep Enjoying Safe Water.
How much does a Hayward pool pump cost?
Which is better Pentair vs Hayward?
The Hayward EcoStar has better energy efficiency and the Pentair IntelliFlo has a reputation for longevity with a proven track record. It’s a close battle between the two pumps and it really comes down to personal preference.
What is the life expectancy of a Hayward pool pump?
On average, pool pumps last eight to 12 years before needing replacement. Over time, it’s normal for pool parts to begin to wear down.
How do I prime my Pentair superflo pool pump?
Does Pentair superflo have freeze protection?
What size filter do I need for a 10000 gallon pool?
Filter Size
A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.
Can I replace my pool pump myself?
A professional electrician will be needed to disconnect the wiring before a pump can be removed. Once a new pump is installed, an electrician will again be necessary to reconnect the wires to the new pump. A do-it-yourself homeowner with basic mechanical aptitude can replace the pool pump in a relatively short time.
How long does a pool pump last?
Is Pentair better than Hayward?
Their filters are user-friendly and reliable. They clean well and overall are very well designed. If you ever have to make a decision from a price perspective, then hands down Hayward is the better choice. However, I personally prefer Pentair products because they have a nicer design and are easier to use.
Can I replace a 1.5 HP pool pump with a 1 hp?
Yes. You can, but what’s more important to answer is do your really NEED to change your pump to one with a higher horsepower rating? If you have complete information on you pool and you’ve determined that your current pool pump is not enough for your needs, by all means, go ahead and change your pool pump.
How do I choose the right size pool pump?
Divide the pool volume by the number of hours that you would want the pump to be running, so that would be 65,947.5 divided by 6. This would give you 10,991 which means your pump should be able to turn around this much water in 6 hours.
What happens if you oversize a pool pump?
A pool pump that is larger than needed has a more powerful motor and circulates water at a higher flow rate. This uses significantly more energy to pump the same amount of water and puts additional stress on your pipes and filter, meaning you’ll need to replace them sooner.
What size pool pump do I need for above ground pool?
For pools up to 24 Ft Round, use a 1 HP pool pump. For pools over 24 Ft Round, we recommend using a 1.5 HP pool pump.
Is Pentair superflo self priming?
Features: Self-priming for quicker, easier start-up. 115-volt or 230-volt models available.
Is it OK to run pool pump 24 hours a day?
A Rule of Thumb
Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.
Should pool pump be on when swimming?
Chemicals that you add to your pool while the water is circulating don’t need to be recirculated; they will stay mixed even if you don’t pump the water continually. Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
Do variable speed pumps last longer?
How long does a Hayward above ground pool pump last?
How many gallons per hour does a 1.5 HP pump?
| Pump Size | GPM (varies with plumbing) | Cost/Hour |
|---|---|---|
| 0.5 HP | 40 | $0.03 |
| 1.0 HP | 60 | $0.06 |
| 1.5 HP | 68 | $0.09 |
| 2.0 HP | 76 | $0.12 |
What size pool pump do I need for a 15000 gallon pool?
10,000 – 15,000 gallon pools need a pool pump with flow rate between 20 and 35 GPM. Based on our flow rate per pump size(in hp) table above, a 1hp pool pump will generate this flow rate.
Does HP matter for pool pump?
Larger horsepower pumps “draw more amps” – and that’s what you really pay for on your electric bill, Amperes. If you can reduce the size of the horsepower on a replacement pump, you will definitely see savings. This can be accomplished by using a High Head pump, or a pump that produces more water volume.
What is the difference between Pentair 011018 and 011028?
The original 011018 Drive/software is no longer being produced or supported therefore the 011018 is being replaced by the 011028 energy Star certified: Meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency & the U.S. Department of energy Energy saving to 90%* versus traditional pumps 8 …
Can a pool pump be too powerful?
The more powerful your pool pump is—the more horsepower it has—the faster it will turn the water over, which means you can run it less often and for shorter periods of time. But this is also dependent upon the size of your filter and the filtration system’s pipes. A too-powerful pump can be too much for a small filter.
Can you oversize a pool pump?
If you are building a new pool, you have the option to go with pretty much whatever horsepower pump you want as long as it meets the minimum requirements of your pool and is properly sized for the filter and plumbing.