The key difference between these products is that the MX8™ Elite has scrubbing brushes on the turbines. This allows for scrubbing of fine and stuck-on debris from your pool’s surfaces. There are also kits available to upgrade an MX8 to include the scrubbing brushes.
The most common cause for a Kreepy to stop working is clogged filter sand. This is easy to diagnose because whenever you backwash the pool filter, you’ll find that the Kreepy works like a bomb for 10 minutes. Then it gets sluggish and slows down or stops again.
Beside this, what is the warranty on Zodiac mx8 elite?
Inground suction cleaning robot
Skimmer or 1.5″ Vacuum Line
Just so, what is the difference between MX6 and MX8 pool cleaner?
Both are compact side suction pool cleaners, and the MX6 is less expensive. There’s a good reason for that, however. The MX8 has two cleaning turbines on the bottom for a wider cleaning swath. It also operates at a lower suction power level than the MX6, and it comes with more hose out of the box.
In general, it’s a good idea to vacuum your pool once a week. You should also vacuum your swimming pool any time you notice large amounts of debris, dirt, or leaves on the floor of the pool (for example, your pool may need vacuuming after a heavy storm).
The Zodiac MX8 is an advanced lightweight suction side pool cleaner that climbs walls, cleans steps, and reverses itself if it gets into a corner. It works in inground pools of any shape, and its dual cyclonic cleaning system picks up dirt and grit as easily as it does organic materials.
Bottom Line: Yes!Robotic pool cleaners are 100% worth the investment. It’ll be the best money you ever spent on your swimming pool. Any automatic swimming pool cleaner should be able to clean your pool within about three hours, depending on your pool’s size.
Review Summary. The Zodiac MX8 is an advanced lightweight suction side pool cleaner that climbs walls, cleans steps, and reverses itself if it gets into a corner. It works in inground pools of any shape, and its dual cyclonic cleaning system picks up dirt and grit as easily as it does organic materials.
You will need to adjust the AD Flow valve when and if a problem occurs. The Zodiac pool cleaner is performing too fast or climbing above the level of the water. The Zodiac pool cleaner is performing slowly or is not climbing the pool walls. *also check to ensure there is no blockages in the pump or skimmer box.
Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock. Over time, these chemicals break down parts in the cleaner and discolor the cleaner.