To maintain a salt water pool you’ll need to keep your filter, pump, and skimmer clean and in good operating condition. With salt water pools, you must inspect the salt chlorinator cell and replace it when needed. Test regularly for proper water chemistry to maintain clean, clear pool water.
Consequently, do It Yourself salt water pool maintenance?
Secondly, which is cheaper to maintain saltwater or chlorine pool?
Chlorine pools are more traditional and are also cheaper than most saltwater pools. However, they can be more difficult to maintain over time. Because there is no generator making chlorine, you will need to add chlorine into the pool on your own.
Do salt pools need chlorine?
As previously mentioned, saltwater pools are not chlorine-free, nor are they chemical-free. A salt water pool is a chlorinated pool, with an alternative delivery system. As such, you will still need other pool chemicals when using a salt chlorine generator.
- You will need to store and handle high amounts of salt.
- Muriatic acid will need to be added to the pool water on a regular basis.
- The pH levels will need to be continuously monitored.
- Any issues with the generator or pool system may require help from a professional.
If you own a salt water pool, you probably know how big of a problem algae growth can be. Once these organisms contaminate the pool, they can grow and spread quickly. Both chlorinated and salt water pools need proper water chemistry levels in order to prevent algae growth.
A salt water pool typically costs $50–$100 per year to maintain. Compare this to traditional chlorine pools, which cost $250–$300 per year. Replacing the cell unit costs $700–$900 every 3–7 years.
While they do cost a bit more on the front end than a chlorine set up, the ongoing maintenance for saltwater pools is typically far less expensive. Generally, you can expect to pay somewhere around $300 to $800 a year on the chemicals you’ll need to maintain a chlorine pool.
You definitely need to drain some water from the pool when salinity reaches a 6,000 ppm level. Most salt water pools should be maintained with a salinity level of 2,500-4,000 ppm. The amount you drain depends on how elevated salinity levels are.
As for alkalinity, proper levels are between 80 and 120 ppm. Again, you can use baking soda to raise it or muriatic acid to lower it. Cyanuric acid or CYA is the preferred stabilizer for salt water pools, and it should be at 70 to 80 ppm. Last but not least is calcium hardness.
Saltwater. You’ll spend about $100 per year on salt and chemicals for this type of pool, $80 to $100 for monthly cleaning, plus $800 every three to seven years for a new salt cell. You may spend more on repairs too, as the salt can damage pool equipment.
So, not only is shocking a saltwater pool okay, but it’s actually important to your pool’s health. Shocking is the process in which you overload your pool with chlorine (3-5 times the normal amount) to improve your pool’s cleanliness and kill off organic matter.
Just like a chlorine-based pool, saltwater pools turn cloudy when chemicals are not balanced. You need to ensure that all chemicals are balanced all the time to avoid cloudy water and growth of algae. The major causes of cloudiness are chlorine, pH, Salinity, total alkalinity, cyanuric acid, and calcium hardness.