How long do Hayward pool heat pumps Last?

With proper installation and maintenance, the Hayward pool heat pump will generally have a lifespan of about 10 years, though many have lasted longer.

Keeping this in consideration, how many BTUs do I need for a 15000 gallon pool?

Pools up to 15,000 gallons should look at the Pentair 125K BTU or higher, and 20,000 gallon above ground pools should look at the Raypak 150K BTU. Pools in very windy or colder areas, or those that don’t use a pool cover should consider installing one size larger.

Moreover, what size heat pump do I need for my pool?

Heat Pump Sizing Chart – Inground Pools

Pool Size (Feet)Summer 4 BTU’sSpring & Fall 5 BTU’s
Up To 15,000 Gallons 14′ x 28′85,000 BTU85,000 BTU
Up To 20,000 Gallons 16′ x 32′85,000 BTU110,000 BTU
Up To 25,000 Gallons 18′ x 36′110,000 BTU125,000 BTU
Up To 30,000 Gallons 20′ x 40′125,000 BTU150,000 BTU

People also ask, is a heat pump worth it for a pool?

Heat pump pool heaters cost more than gas pool heaters, but they typically have much lower annual operating costs because of their higher efficiencies. With proper maintenance, heat pump pool heaters typically last longer than gas pool heaters. Therefore, you’ll save more money in the long run.

Should a pool heat pump be in the sun?

In general, the sun will make it easier for your pool heat pump to do its job. Regular exposure to direct sunlight will keep your heater warm, meaning that it will need to exert less power to warm up the rest of your pool. Solar-powered pool heat pumps also thrive when exposed to consistent sunlight.

14 Related Question Answers Found

What is a comfortable pool temperature?

78 to 86 degrees Fahrenheit

How long does it take for a heat pump to heat a pool?

24 to 72 hours

Are pool heat pumps worth it?

Heat pump pool heaters cost more than gas pool heaters, but they typically have much lower annual operating costs because of their higher efficiencies. With proper maintenance, heat pump pool heaters typically last longer than gas pool heaters. Therefore, you’ll save more money in the long run.

Should you oversize a pool heat pump?

Generally speaking, you should oversize the heat pump as much as possible. You’ll never regret going too big, as doing so means warming the pool at a faster rate without running the heater as much.

At what temperature does a pool heat pump stop working?

When the temperature outside reaches about 50°F (10°C), the refrigerant inside the unit is already approaching freezing temperatures. This can cause ice to form, clogging the heat pump and preventing it from running. Check the outside temperature. If it’s 50°F (10°C) or lower, it’s time to turn the pool heat pump off.

How warm will a heat pump get a pool?

Heat Pumps are designed to raise the temperature of a pool up to the ideal swimming range, between 78 – 82 degrees Fahrenheit,. Because they work by taking in air that is already warm, they work best in humid areas where the ambient temperature stays above 60 degrees Fahrenheit.

Whats the warranty on a Hayward pool heater?

All products manufactured by Hayward Flow Control are warranted against defects in material or workmanship for a period of three years from date of shipment. Our sole obligation under this warranty is to repair or replace, at our option, any product or any part or parts thereof found to be defective.

Does a pool heat pump need to be in the sun?

Absolutely ! It is almost compulsory to use a solar cover when using a heat pump to heat your pool. Not using a solar cover is like not insulating the loft in your house. As your heat pump puts heat into the pool, it will be lost into the air when a solar cover is not used.

Are pool heat pumps expensive to run?

12 KWH for electrical, $1.20 per therm for natural gas, and $2.50 per gallon for propane, I can show you that the operating cost of using a pool heat pump will be half the cost of using a pool gas heater the consumes natural gas and one quarter of the cost of using a pool gas heater that uses propane.

How long does it take to heat a pool with a Hayward heat pump?

In most situations an initial heat up period of 4 to 5 days can be expected. However, after the pool has warmed to the desired temperature the heat pump should be able to maintain this temperature with a run time of only a few hours per day.

How do I clean my Hayward pool heater?

Remove the heater screws that secure the heat exchanger in place; move it to a clean surface. Apply a degreaser to the heat exchanger using a soft-tipped brush. Allow the degreaser time to loosen any soot. Wash the heat exchanger with a garden hose.

Is it better to oversize a pool heater?

A pool heater can be undersized: if it cannot replace the heat lost through evaporative cooling, the pool’s temperature will fall below the ideal. However, there is no such thing as oversizing a pool heater. The larger the heater’s output, the faster it heats the water in the pool, and it will not begin short-cycling.

Can I run my pool pump with heater off?

Yes, the pump has to be running. The heater has an internal pressure switch that needs to be closed…

How long does it take to heat a pool with a heat pump?

24 to 72 hours

Leave a Comment